PDA

View Full Version : 944 alum backing plates - leaks/slinger


spooky
January 9th 2010, 14:22
Hi guys,

I'm using machine aluminium 944 backing plate. Obviously with this setup there is no oil slinger.

Does anyone have else have this setup? Any issues with leaks?

I'm wondering if I should drill a hole in the backing plate just in case.

Thanks!

Spooky

kombi211
January 20th 2010, 06:54
there should be no problems with that backing plates the way they are. there is nothing there to leak. the only vw that had a oil slinger that i no of where the swing axle one. being there was gear lube in the axle tubes to lube the bearings

spooky
January 20th 2010, 07:07
Sorry, I should of clarified, Its on a swing axle