Drysump pump made in Germany

[exportbug]

Hi @ all,
here I offer an drysump pump for Typ4 or Typ1/WBX
The pump is complete out of aluminium and cnc produced .
The gears are 38mm at the suction-side and 26mm at the pressure-side.
The connection thread are M22x1.5
Many people in europe use this pump on racetrack, without oilpressure problems.

Price: 350,-EUR + shipping costs
Shipping worldwide!
Payment with PayPal (+4 percent fees) or money transfer (only europe)

Thanks and greetings, Thorsten Pieper

[Sandeep]

Thanks for posting this Thorsten. I have placed my order.

Sandeep

[Sandeep]

I've received my pump from Thorsten and the quality is outstanding :D

The CB performance 4 gear pump is tiny compared to the new pump :rockon:

http://i10.photobucket.com/albums/a149/turbopics/DS%20Pump/IMG_0380.jpg~original

http://i10.photobucket.com/albums/a149/turbopics/DS%20Pump/IMG_0381.jpg~original

Shipping from Germany took 1 week.

Sandeep

[exportbug]

Hi Sandeep,
thanks :):):)

Greetings Thorsten

[Arnoud]

Hey Thorsten!

Where are the other propaganda pictures(lifters etc.)?

Greets,Arnoud

[Xellex]

Does the TP pump fit under the BAS Ahnendorp or CSP python exhausts w/o any modifications? Looking at Wally's engine pics, I guess it does fit under the Ahnendorp...

[exportbug]

Hey Thorsten!

Where are the other propaganda pictures(lifters etc.)?

Greets,Arnoud

Hi Arnoud,
they comes later:D Lifter are sold out........

Greetings Thorsten

[exportbug]

Does the TP pump fit under the BAS Ahnendorp or CSP python exhausts w/o any modifications? Looking at Wally's engine pics, I guess it does fit under the Ahnendorp...


Hi Xellex,
normaly it have to fit, I don´t heard any problems......
The pump come approximately 60mm out off the motorcase.

Greetings Thorsten

[petevw]

Very nice pump!

[Humble]

I like the design of the german pump, looks pretty stout. I'm guessing you have to use a 5" power pulley with this pump? It doesn't look like a larger pulley would clear the pump even with a spacer.

[Arnoud]

Hi Arnoud,
they comes later:D Lifter are sold out........

Greetings Thorsten

Again(or as usual:lmao:)


ps.I have a set already but forgot the details on how to machine the lifterbores to fit the adapterbushings:o.Will you be in Hannover at Mel's?


Greets,Arnoud

[exportbug]

Again(or as usual:lmao:)


ps.I have a set already but forgot the details on how to machine the lifterbores to fit the adapterbushings:o.Will you be in Hannover at Mel's?


Greets,Arnoud

Hi Arnoud,
again:D:D:D but next week, comes the new series:p:p:p :):):)
I will be in Hannover at Mel´s......
You only have to mill the lifter bores down....7mm are enough!!
Then heat up the motorcase to 80°C and press the bushings into the case.
Ready!!!!

Greetings Thorsten

[DORIGTT]

Dammit I didn't want to spend that much on a pump! But it looks soooo goooood.

[Wally]

I like the design of the german pump, looks pretty stout. I'm guessing you have to use a 5" power pulley with this pump? It doesn't look like a larger pulley would clear the pump even with a spacer.

Humble,
I used to have a "stock" type 4 Ahnendorp 145mm (5,7"?) pulley with the normal porsche cooling systems, which fits no problems.

Actually..I have now the 157mm (6,2") pulley with the Riechert set-up with a toothed ring on the back side and that one didn't clear, but I have cut out Thorstens nice pump for the pulley and toothed wheel..:shocked: and now it fits the turbo engine as well :rolleyes:
I don't dare show pictures of it though...

[petevw]

Hi Arnoud,
they comes later:D Lifter are sold out........

Greetings Thorsten

Tell us about your lifters.........

[exportbug]

Tell us about your lifters.........

Hi Petevw,
I produce 58gram light weigth toolsteel lifter. The new series come in the next week, then I can deliver.....
I will make a new thread, but so much.....here are a pic......