PDA

View Full Version : 1303 75' 2387 efi


JIMP
June 26th 2010, 12:37
Hello all

as my engine is at last ready, and as my 1303 will be a germanlook, I thought I should share here some info, some pictures and videos for now from the engine, just received it from JPmotrosport

http://img693.imageshack.us/img693/9539/spracingt12387ccvalveno.jpg

http://img138.imageshack.us/img138/8548/spracingt12387ccjpmhead.jpg

http://img718.imageshack.us/img718/7069/spracingt12387ccdrysump.jpg

http://img24.imageshack.us/img24/5121/spracingt12387ccrollert.jpg

and some videos

http://www.youtube.com/watch?v=nOR7HNWofE0&feature=player_embedded

http://www.youtube.com/watch?v=UtzR15OpV1w&feature=player_embedded

The car still needs a lot of work but I think that the engine is already a good motivation to start with, cheers for now

Friendly

Dimitrios

volkdent
June 26th 2010, 16:12
Beautiful motor!

Jason

NO_H2O
June 26th 2010, 18:31
Very nice engine. Are those Nickies? Looks like you are set up for drag racing.

JIMP
June 27th 2010, 03:33
Hello

thanks Jason, NO_H2O yes they are nickies from LN engineering, well the car will see some black races but not drag strips, I have other for the strip, so this one will be primarily a street car. Some spec as it's not seen, don't have older photos, sorry

scat 86mm flanged crank, forged version not billet version
carrillo 5,7" rods
Je pistons
nickies and arp's
JPmotorsport MS230heads, inlet manifolds, roller throttle bodies and 5stud ratio rockers, the power comes from the heads out of the box, no porting no secrets, juts cutting the valve seats and that's all
48X38 cbperformance titanium valves
schubeck ceramic lifters
JPmotorsport aluminum tappered pushrods
engle cam -was unlucky to this one as two months after my engine was assembled Johannes released his raptor series camshafts, probably I would have some more power with one of these

Friendly

Dimitrios

judgie
June 27th 2010, 06:36
orsum looking motor and some amazing numbers on the dyno, cant wait to see the car.

volky00
June 27th 2010, 11:10
nice looking set up.....:p

Wally
June 27th 2010, 14:53
Yeah, that is very hard-core Dimitrios! You must be one of very few that run the F1 oval roller throttle bodies.

Can you show us the car as well pretty please??? ;)

JIMP
June 27th 2010, 16:39
Hello

thanks for the kind words, Wally I'll search for some decent looking ones or I will make some newer, as you understand I couldn't afford all together, now that the engine is done I can arrange to start working on the car -well in about a month from now as we're entering vacation period- anyway I'll post pics in the first instance

Friendly

Dimitrios