View Full Version : KMC camber and caster kit
graham
October 30th 2012, 02:01
Hi has anyone any info one these inc real life experience,they look pretty impressive/useful ?
http://www.k-mac.com/pages/newprods/vw/vw.htm
Steve C
October 30th 2012, 02:28
Hi
I have some in my bug, very nicely made and he's about 30 minutes drive from my house. I do get the boing noise if hit a nasty pothole as they aren't as well insulated as the stock rubber ones.
Steve
graham
October 31st 2012, 01:12
Hi
I have some in my bug, very nicely made and he's about 30 minutes drive from my house. I do get the boing noise if hit a nasty pothole as they aren't as well insulated as the stock rubber ones.
Steve
Hi thanks Steve,I've just been looking at your build thread and realised that it was you that made me aware of these :)
Stupid question but is there still room to fit a strutt brace ?
Steve C
October 31st 2012, 21:17
Hi Graham
You can still fit a strut brace OK.
The only downside for me is you loose the correct adjustment if you remove the strut for some reason.
My coil over springs are set up so that I can undo my struts without the need for spring compressors.
Steve
graham
November 1st 2012, 09:48
Hi Graham
You can still fit a strut brace OK.
The only downside for me is you loose the correct adjustment if you remove the strut for some reason.
My coil over springs are set up so that I can undo my struts without the need for spring compressors.
Steve
Ok thanks Steve I just wanted to make sure
Regards Graham
vBulletin® v3.8.11, Copyright ©2000-2024, vBulletin Solutions Inc.