986s brakes on 944n/a

[subamaniac90]

Can i fit the front brakes of the boxster s(986) to the 944(pre86) n/a hub ? Except from the caliper adapter what other mods should i do? Thanks in advance.

[Steve C]

I fitted them to Beetle stubs using 944 hubs

http://i1184.photobucket.com/albums/z328/1303Steve/boxsterrotor944hubs_zps84c283c6.jpg~original (http://s1184.photobucket.com/user/1303Steve/media/boxsterrotor944hubs_zps84c283c6.jpg.html)

http://i1184.photobucket.com/albums/z328/1303Steve/boxster%20front_zpspzzsn9eq.jpg~original (http://s1184.photobucket.com/user/1303Steve/media/boxster%20front_zpspzzsn9eq.jpg.html)

http://i1184.photobucket.com/albums/z328/1303Steve/boxster%20front.1_zpsyuozkge9.jpg~original (http://s1184.photobucket.com/user/1303Steve/media/boxster%20front.1_zpsyuozkge9.jpg.html)

http://i1184.photobucket.com/albums/z328/1303Steve/boxster%20front%202_zpsponizl8l.jpg~original (http://s1184.photobucket.com/user/1303Steve/media/boxster%20front%202_zpsponizl8l.jpg.html)

[subamaniac90]

thanks for the info.

[effvee]

Hi Steve, Question did you recondition the calipers yourself? If so how are you able to recondition the Porsche lettering so nicely.

[Steve C]

Hi

I just painted the outside, so a rattle can restoration and lettering is a decal I bought on eBay, they have stood up to the heat very well.

Lucky I bought a few spare decals as they wanted to to stick to the backing and not to the calliper.

Generally Porsche callipers have stainless piston which don't corrode so I full rebuild is not always needed.

Steve

[subamaniac90]

Hello, just bought the calipers and discs. Do you have the adapter dimensions?
Thanks in advance.

[flat]

Turn the early hubs down to 157mm and theyll fit the 986s rotor. I can make the caliper adapter but the axial offset can vary depending on how your 944 hubs were machined for t1 spindles.

[subamaniac90]

Actually my calipers are 986 2,5 base model. P/N 986.351.422. Spindles and hubs are early 944 N/A. By 157mm you mean the diameter of the hub?

[flat]

Yes outside diameter (OD) of hub.

With the 986 non S caliper theres another option. Use a 84-89 911 carrera rotor (282x24) and itll bolt on like a 944na rear mount rotor(282x20) and match the boxster caliper width (24mm). I build alot of these setups because they fit 15" wheels, whereas the boxster rotor is bigger (298x24) and requires 16"

[subamaniac90]

where I am the 986 rotors are half the price of carreras. Do the pads cover the whole carrera rotor area, or overhang a bit?

[flat]

They cover. No overhang.

[subamaniac90]

oh, I thought with carrera rotors, i would have to shave off some material from the pads. So what do you suggest? Wheel size is not an issue, i run 17s.

[subamaniac90]

forgot to mention, on the rear i ve got 299x24 turbo discs with 996.352.422 calipers.

[Wally]

Hey Steve,
Where did you get the 944 adapter bearings from? I may also need a set ;)

TIA,
Walter