PDA

View Full Version : spare tyre


Stuart
April 21st 2003, 17:19
Can somebody tell me what type of porsche spare tyre fits my 944T suspension(4-pot brembo's). Do they fitt the in the trunk of my 1303 super.

Sandeep
April 29th 2003, 16:32
I thought I would make this thread a little more generic.

What are you guys running the 5x130mm stud pattern using for a spare tire ?

Please let me know where you are storing the spare and what mods you may have done to store it.

I know I can only fit a 15x4.5 spare in my standard's spare tirewell.

Sandeep

Steve C
April 30th 2003, 09:07
Hi

Im using a 15 inch Porsche space saver. The only problem is were do I fit the flat once I change it.

Steve C

Sandeep
April 30th 2003, 09:55
I never thought of that !

Where do you put an 18x10 with 265/35 when you have to change it ?!? :eek:

Sandeep

vujade
April 30th 2003, 11:12
Im using a 15" Porsche Space Saver.

Im sure you can put your wheel in the back seat area once you change it

Shad Laws
April 30th 2003, 12:31
Hello-

I went the el-cheapo route. I got an old 5-lug 356 rim (4.5x15) for $25 and put a 165 tire on it for $0. You could even put an original bias-ply tire on it and make it fit in a Ghia spare tire well (even 165 is too big for a Ghia's space).

Take care,

vujade
April 30th 2003, 13:37
What size spare do you need if you are running 993TT brakes?

Wally
April 30th 2003, 14:51
I had saved a 4,5x15 Fuchs to use as a spare, but no model Fuchs (not even 16") fits my Brembo brakes on the front... So I left the spare out all together! Saves weigth too. After that I decide to put the battery in the front on the floor, so now a spare doesn't fit anymore anyway.
My cell phone is much lighter than a spare if I would ever got a flat tire (has never happened tho).
Walter

MattKab
May 2nd 2003, 18:12
I've not got a part number but this is what we need up to when the unthinkable happens:

MattKab
May 2nd 2003, 18:22
'Looks like a pink pug 1.9gti wheel to me!

Standard 944T spare' is it not? But what year?

Can anyone confirm this will indeed fit in the 'well of a Super?

I may have found one. Please?

Matt

(That is a pic from here awhile back) ;)

Superman
May 3rd 2003, 00:34
My spare tire well is filled with a radiator :silly:

Superman
May 3rd 2003, 00:36
Originally posted by MattKab
Can anyone confirm this will indeed fit in the 'well of a Super?

Measure the diameter of the tire well, then you'll have the maximum size fitment and can compare spares.

GRMNLK
February 11th 2005, 01:05
I have a question about a spare wheel, but I don't want to have to start a new thread...
I have CB dropped king/link discs up front and was wondering if anyone knows if a 5.5 x 15 space saver rim with a 165 from an old 911 will spin with out interfering with the caliper? My first thought is yes because they are vw parts and they aren't "big reds". :confused:
Thanks

Stuart
February 11th 2005, 06:50
My solution is a porsche 996 spare tyre. It's :) a inflatable type but fully inflated it will fit the sparetyre well very nice!!!!! Forgot to say it's a 17 inch rim.

justdubbin
February 13th 2005, 10:01
My solution is a porsche 996 spare tyre. It's :) a inflatable type but fully inflated it will fit the sparetyre well very nice!!!!! Forgot to say it's a 17 inch rim.


Stuart, have you got the part number please :agree:

Audiosnail
June 30th 2008, 17:21
Porsche spacesavers.The 15" silver one on the left is P/N 951.362.131.00 and the 15" red one in the middle is P/N 951.362.130.01. The red one pictured on the right is a 16" alloy wheel with P/N 965.362.130.01.

Wally
July 1st 2008, 10:13
I have two red 17" space savers as well. I use them only fro drag racing.
Stock they have a 105/95/17 tire with an 'M' speed rating (160 km/u max iirc)

They are 3,5"x17 ET19. Really need the part number? :rolleyes:

Rears are the 5,5x15 specimens, just for drag racing used here:
http://i174.photobucket.com/albums/w112/fusca03/KCD%2018-5-2008/Afbeelding560Medium.jpg~original

mabbo
July 1st 2008, 18:01
hello

you people using the 15" space saver wheels are using them with 4 pot brembos ok? do they clear ok because i was under the impression that you needed to use 16" and bigger wheels to clear the 4 pots?

mabbo

Wally
July 2nd 2008, 03:16
There is no general '4-pot Brembo' as there are many types and they all come with different disk sizes as well...

To my surprise I did manage the 15" spacesaver around my former 302x32 disk with the huge 928S 4-pot brembos, so my guess is they clear more easily than most other rims, but no guarentees whatsoever.

Rears usually always clear. I now have 299x24 with the 993 rear caliper and that clears fine as you can see in the picture above.

mabbo
July 2nd 2008, 05:11
Cheers for that Wally,
I read the 'which 944 conversion' in the tech articles.
The 1st method was to use a Kerscher rotor, CB dropped spindle, and 4 piston 944 caliper.
Now, after searching on here i think i remember people saying you must use a rear caliper as the Kerscher rotor is only 20mm thick.
Id like to go for this method i think, as there is next to no machining, and everything apart from caliper will be new.
If I did this method, I assume the 944 rear 4 pot is one of the smaller ones so maybe I could use these under 15" space saver wheels?
Mabbo

Wally
July 2nd 2008, 06:49
My guesstimate would be yes, but no guarentees as I have not done exactly that myself.

mabbo
July 2nd 2008, 08:05
cheers for that wally, i appreciate it :)

ps - your car rocks :D

flat
July 17th 2008, 21:24
Here's my 996 spare in my 1302. Lots of room, even for my new triangulated strut brace in the works....
http://images.thesamba.com/vw/gallery/pix/460612.jpg
http://images.thesamba.com/vw/gallery/pix/460611.jpg
Lanner

Scotts73SB
July 17th 2008, 22:36
Excellent shot.. thank you very much!