944 track on the front

[zen]

been doing a bunch of reading on a 944 conversion for my standard. i am mainly interested in the track widening in the rear. i did not see an answer to this question though...do the 994NA or 944T brakes on the front widen the track? if so, how much?

[SprintStar]

Yes, the 944 NA brakes do widen the front track as well. I don't have exact numbers, but after fitting them to my '73 Super, the 15" x 6" Cookie Cutters don't fit under the stock fenders no more....

I think it's roughly about 1/2 to an inch per side.... Eyeballing it...

Sprint.

[zen]

thanks. i know when i went from drums to ghia discs on my standard it adds 1/4" per side. anyone else know for sure on 944NA and/or 951?

[chigger]

Mine only increases the front 1/4 inch for the Ghia hubs and the thickness of the early 944 rotor about 3/16 inch. It was the best I could do at the time. since then I can do it with only 1/4 inch increase.

[SprintStar]

Err.. So you are using Ghia hubs and rotors with 944 calipers?

Sprint.

[Superman]

The 944 conversion, on a Super, widens the track by 10mm per side. I have no idea on a Standard.