PDA

View Full Version : Ultimate GL tranny if you have too much torque...


Shad Laws
July 20th 2003, 22:25
Hello-

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=46104&item=2424520842

The 930... It's not a five-speed, but you can put enough torque through it to twist your car in half :-).

Take care,

ppp
September 18th 2003, 06:32
just picked one up for my 1303 project. planed to mount it solid to frame. wanted to use stock shifter but may windup with a WEVO shifter if i can find some extra cash. Kennedy said flywheel will be $300. apparently it will bolt right up. (i hope)

Panelfantastic
September 18th 2003, 11:27
Sweet!
How much did you have to give?

ppp
September 18th 2003, 19:17
2250..shipped.
Neew ring and pinion with LSD.

Panelfantastic
September 19th 2003, 05:04
Wonder what this one will go for?
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33733&item=2433148604

ppp
September 19th 2003, 06:19
it's non-LSD and the guy wants $2350 for it...theres one on www.pelicanparts.com with 80,000 miles LSD for less than $2000.

ppp
September 19th 2003, 13:49
will it bolt right up to a type4 and use the same flywheel?

Michael Ghia
September 20th 2003, 21:52
Yes it'll bolt right up to your T4 but you'll need a special flywheel to go with it. Kennedy Eng should be able to help.
MG

ppp
September 27th 2003, 19:40
can you hear me know?....good.

ppp
October 22nd 2003, 16:51
Kennedy says he doesn't have time to build my flywheel. even though he took my order and made me wait 3 weeks before contacting me. is there anyone else who can without me having to send a complete clutch and flywheel as a go-by?