My cooling ducts

[craazy Cooter]

Here are my front ducts...

[craazy Cooter]

The backing plate... I got stock Ghia backing plates, and welded some 2.25" exhaust tubing to them, then I cut the holes. I used
some 2.5" silicone hose from Racers Wholesale to connect the scoop to the plate. The scoop is the inner fenderwell air intake from a 88 escort gt. I just pop riveted them on. No more fade. Yeah I know my rotors aren't cross drilled, but it still definitly helps
brake temps when zooming in and out of traffic.

[craazy Cooter]

A front pic... You can see the ducts under my secondary lights...

[jrinlv]

Cool, I have never heard of this before, is there someone eles (or model of car) that dose this?? Looks good though, good idea.....JR

[Sandeep]

Nice work ! and very functional too.

Sandeep

[craazy Cooter]

sorry about picture quality- they're polaroids:(

[boygenius]

So many good ideas, so little time.:silly:

[hybrid_john]

Very nice jod on the cooling ducts...VERRY CREATIVE...I like that alot, I want to do that now!:goodness: :D

[Racelook]

Nice work.. but does the tubing not hit the tires by wide steering??

Grt. Wiebrand

[zen]

for those stripping 944/951 parts, my 951 uses a similar setup. they have a funneled intake in the nose. there is then a delector to redirect that pipe of air to the vented rotors. there is no hosing inbetween. you might be able to use those pieces.

[craazy Cooter]

The tires don't rub on the hoses. Amazing.