View Full Version : Porsche code ?
jrinlv
March 28th 2004, 13:59
What offset is a 928-361-616-00 rim, phone dial? Thanks for the info.
Isn't the offset usually stamped on the rim somewhere? JR
boygenius
March 28th 2004, 16:21
It is usually displayed as ET40 or ET50 ect...
jrinlv
March 29th 2004, 01:03
Any help here, I need to know, the sooner the better. I thought they would be 23 or 52, not 40 or 50? Any help though would be great..Thanks JR
jrinlv
March 29th 2004, 01:04
Boy sorry if you where just using that as an example........
vujade
March 29th 2004, 08:47
JR, you working on some other rims also?
they should have an et52.3 or et23 for phone dials.
boygenius
March 29th 2004, 11:52
Boy sorry if you where just using that as an example........
It's OK... :laugh:
Thorkhild
March 31st 2004, 11:29
I have the same wheels 16x7 phone dials
i did some measureing yesterday on my wheels
6 5/16" backspacing or 160mm
and if my measurements were good
offset is 2.4375" or about 62mm
kafer.chris
March 31st 2004, 19:04
they are 928 rims look in a reference for 928 wheel et for the same width and diameter wheel they did not chage them that much
if thats a help
i have some 7" x 16" 928 gullidecks (flat face with a slot cut out) the ET is 65
search 928 rims on the net.. :confused:
The only listing that I can find for that part number has a "-85" under remarks. This may or may not be the ett of the wheel.
Try a search on the web?
Good luck,
Dave
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.