PDA

View Full Version : Are 914 gauges same connections as a IV?


kra710
August 18th 2004, 09:18
Ok as you know I have a 1977 transporter with a 2.0 L type IV, I was looking into installing all new guages and fabbing a plate out of aluminum. I like the 914 gauges but I am curious, Will they work with no modification as far as wiring is concerned? I guess this really will probably only apply to the fuel and speedo gauge, but since so may people have IV power Im sure you guys would know.

NO_H2O
August 18th 2004, 10:08
My fuel gage is off, runs empty between 1/2 and 1/4. I fill up at 1/2. I did see someone replace the indicator inside the Porsche case with a VW indicator using some epoxy.

kra710
August 18th 2004, 18:56
but as far as the other connections its bolt on? If thats the case I can just make a bezel and install them?

boygenius
August 18th 2004, 19:14
My fuel gage is off, runs empty between 1/2 and 1/4. I fill up at 1/2. I did see someone replace the indicator inside the Porsche case with a VW indicator using some epoxy.


Check this thread for information.

http://www.germanlook.com/Forums/showthread.php?t=3716