PDA

View Full Version : Gauge Dimension


flat_iv
August 18th 2004, 22:12
Does anyone know what the outside diameter of each gauge is in a 914 gauge setup? I know the center tach is larger that the speedo and fuel gauge. Trying to see if I can get that setup in my ghia.

Bill K.
August 19th 2004, 02:46
Bezel diameters are:
Tach 4.75"
Speedo/combo 4.15"

Gauge panel is roughly 14.25" by 5.10" over the tach and 4.90" over the combo/speedo holes -- the top is curved, bottom is flat.