928 GTS brake info REQUIRED

[kafer.chris]

To all the big brake people out there..

I have a 68 karmann cabrio beetle project that i have a full set of 928 GTS rotors and calipers

also some 944s2 front carriers that i wish to fit with a bearing sleeve kit to run porsche bearings...

the question is::

i have the original 928 GTS discs front & rear

will the fronts fit the spindles or will the be too deep and hit the steering/suspension knuckle/ball joints

and will the rear discs fit as 944 style (will be running early 944 ali arms..)

any help would be great (pictures, advice or tech pictures ..)
http://img.photobucket.com/albums/v54/kafer.chris/KIF_0374.jpg~original
chris

[SuperRSi]

Hey Chris,

As I said via email, with the MBT front kit the GTS rotors fit, but they are real close to the arms. I have since converted the Manx back to its Volks roots and installed a set of CSP vented fronts. Just did not need the weight of the 928 system without using a big engine. I am using the system on my Super Convert, but using 944T front spindles.

Good luck,

Randy