PDA

View Full Version : notch 11 project

notch11
August 6th 2006, 21:07
hello new to the forums been checking out the sit for a while now
here's my 1964 notchback. the trans is a 915 from a 76 911 the motor is a 2.2 from a 71 it has the marelli dist. (still need a dist cap :( ). Originally i was gonna use the stock vw irs arms with early 944 disk brake brackets but i was on ebay looking for 944 hubs when i found a set of 951 rear arms for cheap so i think i'm gonna use those now.
http://www.germanlook.com/Forums/attachment.php?attachmentid=2251&stc=1&d=1154912661
http://www.germanlook.com/Forums/attachment.php?attachmentid=2252&stc=1&d=1154912661
http://www.germanlook.com/Forums/attachment.php?attachmentid=2253&stc=1&d=1154912661
notch11
August 6th 2006, 21:15
couple more pics
http://www.germanlook.com/Forums/attachment.php?attachmentid=2254&stc=1&d=1154913230
http://www.germanlook.com/Forums/attachment.php?attachmentid=2255&stc=1&d=1154913230
notch11
August 6th 2006, 21:25
http://www.germanlook.com/Forums/attachment.php?attachmentid=2256&stc=1&d=1154913901
LLVWGL
August 7th 2006, 04:35
NICE, I see you are also using a porsche motor. This should be awsome!


For a second I was like "where are the frame horns?" when i was looking at the trans pictures:doh:
Wally
August 7th 2006, 07:48
Verry cool!
Unfortunately, we have inspection rules that sortof almost make it impossible to get a 6-cylinder on the road legally in a 4-cyl. car...:(
Where are you from?

Regards,
Walter
notch11
August 7th 2006, 13:43
I live in Washington state,
zen
August 7th 2006, 13:48
Verry cool!
Unfortunately, we have inspection rules that sortof almost make it impossible to get a 6-cylinder on the road legally in a 4-cyl. car...:(
Where are you from?

Regards,
Walter

i hate hearing things like that. :mad:

you would be shocked at some of the crap that makes it on the roads here. leaves room for our bastard cars to be on the road though. :D