Sandeep
April 15th 2008, 10:19
I have the following items for sale, email for pictures.
1. Resurfaced porsche 914 215mm flywheel and matching stock pressure plate. Balanced as a pair, will hold 180 ft.lbs with stock clutch disc. $C160.
2. Near new (200 kms) 215mm porsche 914 6 spring clutch. $C80.
3. 228mm bus clutch nearly new (100km). $C80.
4. Remote oil cooler thermostat, -8 AN male fittings (2) + 1/2" hose bibs (2). Opens at 170F . $C60. SOLD
5. New T1 CV boots with flange, black X 4. $C20.
6. Porsche 928 S4 front calipers (2) with pads, great shape painted red. Use these with a 304mm x 32mm rotor. 2 X 44mm pistons + 2 X 36mm pistons. $C400.
7. Porsche 993T front rotors (L + R) used. 322mm x 32mm, thickness = 30.8mm. $C150.
8. EMPI forged dropped BJ disc spindles (L + R) NEW. $C160. SOLD
9. 1 set of Cima/Mahle 94mm pistons and cylinders. B pistons, NEW in box, comes with C clips. $C160.
10. T4 66mm crank with matching rods & rod bearings - polished and balanced, all is within spec, magnafluxed and checked for cracks - all good. Rod bearings look almost new. $C120.
11. T4 71mm crank with matching rods - this is the 71mm crank in my current 2.0 turbo motor, polished and balanced, magnafluxed - no cracks, rods have ARP bolts. $C200.
12. T4 94mm cylinders, Original German - These measure slightly oversize for a 94mm piston, but would be fine to bore to 95mm or 96mm. No broken fins. Used in my 2.0 T motor, checked for cracks - passed. $C150.
13. Web 73 cam for a T4, used for 1 summer with ceramic lifters. The only wear visible is slightly through the spray on dry moly (factory coating). You can feel or measure NO WEAR. This is for the cam only, no gear or lifters $C120. PENDING
14. Raby SLR'd lifters, new in the box. Bought from the T4 store in late 2006, would go well with the cam above. $C120. PENDING
15. Rayjay Turbo ... spins freely. $C40.
16. Porsche 1" wide wheel spacers with studs. 2 spacers total. $C120.
These items are available on other forums as well.
Thanks
Sandeep
1. Resurfaced porsche 914 215mm flywheel and matching stock pressure plate. Balanced as a pair, will hold 180 ft.lbs with stock clutch disc. $C160.
2. Near new (200 kms) 215mm porsche 914 6 spring clutch. $C80.
3. 228mm bus clutch nearly new (100km). $C80.
4. Remote oil cooler thermostat, -8 AN male fittings (2) + 1/2" hose bibs (2). Opens at 170F . $C60. SOLD
5. New T1 CV boots with flange, black X 4. $C20.
6. Porsche 928 S4 front calipers (2) with pads, great shape painted red. Use these with a 304mm x 32mm rotor. 2 X 44mm pistons + 2 X 36mm pistons. $C400.
7. Porsche 993T front rotors (L + R) used. 322mm x 32mm, thickness = 30.8mm. $C150.
8. EMPI forged dropped BJ disc spindles (L + R) NEW. $C160. SOLD
9. 1 set of Cima/Mahle 94mm pistons and cylinders. B pistons, NEW in box, comes with C clips. $C160.
10. T4 66mm crank with matching rods & rod bearings - polished and balanced, all is within spec, magnafluxed and checked for cracks - all good. Rod bearings look almost new. $C120.
11. T4 71mm crank with matching rods - this is the 71mm crank in my current 2.0 turbo motor, polished and balanced, magnafluxed - no cracks, rods have ARP bolts. $C200.
12. T4 94mm cylinders, Original German - These measure slightly oversize for a 94mm piston, but would be fine to bore to 95mm or 96mm. No broken fins. Used in my 2.0 T motor, checked for cracks - passed. $C150.
13. Web 73 cam for a T4, used for 1 summer with ceramic lifters. The only wear visible is slightly through the spray on dry moly (factory coating). You can feel or measure NO WEAR. This is for the cam only, no gear or lifters $C120. PENDING
14. Raby SLR'd lifters, new in the box. Bought from the T4 store in late 2006, would go well with the cam above. $C120. PENDING
15. Rayjay Turbo ... spins freely. $C40.
16. Porsche 1" wide wheel spacers with studs. 2 spacers total. $C120.
These items are available on other forums as well.
Thanks
Sandeep