PDA

View Full Version : Porsche O.E. Wheel Discussion


Superman
November 13th 2008, 22:37
Please use this thread to discuss the fitment of Porsche factory wheels.

http://www.wheelenhancement.com/index.php?t=Wheels

flat
November 15th 2008, 12:53
I'll bite...

My 1302 - Boxster S brakes all around, with 944 steel arm rear setup (+22mm per side). Modified 944 hubs in the front for beetle bearings (+15mm per side). 17x7et55 cup II's in the front (205/50), 17x8et70 Cup II's in the back (225/45). Topline struts (old style) with honda coil conversion. Stock fenders, fits lovely.

http://images.thesamba.com/vw/gallery/pix/470894.jpg

Lanner

Superman
November 15th 2008, 14:41
Thanks Lanner, using this thread as a FAQ and if everyone (tried and true) can post their results it would be a valuable resource.

flat
November 15th 2008, 17:13
No worries Superman. This is a great sticky. Here's a setup I did last winter (Nelson's Vert):

1302 Vert. Bugpack adjustable struts, Honda coils. 944Turbo front brakes, with modified 944 hubs in the front for beetle bearings (+12mm per side). 944 steel arm rear setup (+22mm per side). 16x6et52 964 starfish wheels in the front (205/50), 16x8et52 964 starfish wheels in the back (225/50, IIRC). Stock fenders, Everything fits well, but the 8's in the back don't work (rubs fender) in that offset. Will be changing to 7et52's and everything will be butter.

Lanner

http://images.thesamba.com/vw/gallery/pix/470893.jpg

flat
November 15th 2008, 17:18
One more (Carbo's Rag)

55 Rag. 3" narrowed beam (BJ). 944NA front brakes, with modified 944 hubs in the front for beetle bearings (+15mm per side), on welded dropped spindles. 944 steel arm rear setup with 944NA brakes (+22mm per side) modified for long swingaxle tubes. 17x7et55 Cup II's wheels in the front (205/40), 17x7et55 Cup II"s wheels in the back (205/50). Stock fenders. Everything fits well, but we had issues with inner front fender clearance. Added 20mm fronts spacers with long studs (OEM, from 944 rear) and everything is great. In retrospec, should have started with a less narrowed beam. 1.5" narrowed beam would be perfect.

Lanner

http://images.thesamba.com/vw/gallery/pix/470892.jpg

flat
November 15th 2008, 17:31
My Bus. This thing has gone through many wheel/brake setups.
All have these common elements, 4.75" narrowed beam , 3.5" spindles, IRS conversion with wagenswest kit using 944 steel arms.

First off: 944NA brakes, 15x6et36 cookies, 175/55F 185/65R.

http://images.thesamba.com/vw/gallery/pix/497254.jpg

Last summer:
17x7et55 (205/40) and 17x8.5et55(235/45) techno-twists. On 944NA brakes, used 12mm rear spacer.
http://images.thesamba.com/vw/gallery/pix/390763.jpg
http://images.thesamba.com/vw/gallery/pix/497255.jpg

This summer: 16x6et50, 16x7et40 boxster split stars, with 205/40F and 225/50R on 964 C2 brakes.
http://images.thesamba.com/vw/gallery/pix/497256.jpg

I also had 17x7et55 and 17x9et55 Cup II's on the bus with the 944NA brakes, but can't find any pics. The rear was a SQUEEZE, but it fit.

Steve C
November 15th 2008, 17:40
Hi

Not Porsche wheels, but the offset and size are Porsche like.

17x7 ET 55 (factory Subaru BBS), on a 2 bolt 1303. Front fit nice with narrow coils, rear needed to go steel 944 arms & brakes, fit really well.

Steve

http://i1184.photobucket.com/albums/z328/1303Steve/IMG_2700.jpg~original

http://i1184.photobucket.com/albums/z328/1303Steve/daveatmarulan.jpg~original

flat
November 15th 2008, 23:27
Steve, Looks killer. You remachined the rear 944 brakes for 5-100? What brakes in the front?

Lanner

Steve C
November 16th 2008, 04:44
Hi Lanner

Thanks, it is 5x100 now. This is my sometimes daily driver and sons 1st car until I finish my other 1303.

I was able to score for the rear a pair of twin piston alloy Brembos from a later 911, these have 42mm pistons. On the front I'm using stock bug rotors with early Type 3 calipers, these also have 42 mm pistons. Its very slightly biased to the rear, I'm fitting a bias valve soon.

Steve

Superman
November 16th 2008, 08:58
This is my ... sons 1st carThat's awesome Steve!!! You're a really good father. :)

Steve C
November 16th 2008, 09:19
Hi James

He just got his licence on November 1st, I have a 1776 ready to go in when he has a bit more experience, then some dual 40mm Webbers.

Steve

Wally
November 16th 2008, 10:10
Hi Lanner

I was able to score for the rear a pair of twin piston alloy Brembos from a later 911, these have 42mm pistons.

Steve
IIRC, the C2 rear 2-pot Brembos were 44mm? Anyways, I really love those calipers!
Work great on the rear of my VW412, speaking of which (see the bridge I'am making :D ):

http://www.keversite.nl/fotoalbum/fotos/43091.jpg
http://www.keversite.nl/fotoalbum/fotos/63256.jpg

Porsche ClassicSport I (BBS made) 7x17 ET55 and 8,5x17 ET52 with 195/45(in the pic still 205/50) and 225/45 rear.
Front calipers are BMW 320, 48mm cups. Adapter plate for the off-set and stud-adaptment

Wally
November 16th 2008, 10:18
The bug has the same wheels, but in 18" form 7,5J and 9J wide with 245/35 and 225/35 (now 225/40) semi-slick like tires.
993 rear calipers on the rear, GT2 rear ones on the front. Alu wide rear alu arms, front has 18mm 944 spacers with the original long studs, which gives an amazing original steering circle (which is relatively small for a 1303). Original size (wide) springs up front. Widenend fenders from Kerscher.

http://www.keversite.nl/fotoalbum/fotos/66022.jpg

Steve C
November 16th 2008, 18:30
Hi Wally

I must have got something wrong in the measuring.

They are an amazing calliper, very light. Would they fit on the front of a 944 setup? On my car they work very well with the stock 19mm M/C.

So your running 48 mm front callipers are you running the stock M/C?

Steve

Wally
November 17th 2008, 03:14
Hi Wally

Would they fit on the front of a 944 setup?

No, the bolt spacing of the rear of a 944 (all models) is 94mm IIRC and front 944 is 76mm bolt spacing. Also to remember they are for a 24mm disk; not many front disks are 24mm but you could make s/th work I' am sure.

So your running 48 mm front callipers are you running the stock M/C?

Steve
Yes, with the stock front solid disk. Very hard/high pedal. Really pulls it to the ground on all 4 corners simultaneously. Its an amazing sensation as the car doesn't dive anymore under braking because of that. I do encounter the rear to lock up first in some extreme situaties, which isn't good, so I want to install something porsche/brembo in the front as well one of these days. A bigger disk will probably avoid fade and bite a bit harder/longer so balance will be a tad less agressive. Though I really like how it brakes now, even with the knowledge it could/will lock up in the rear in the end.. I know I' am weird/suicidal :D

blitzvw
November 17th 2008, 03:54
IIRC, the C2 rear 2-pot Brembos were 44mm? Anyways, I really love those calipers!
Work great on the rear of my VW412, speaking of which (see the bridge I'am making :D ):

http://www.keversite.nl/fotoalbum/fotos/43091.jpg
http://www.keversite.nl/fotoalbum/fotos/63256.jpg

Porsche ClassicSport I (BBS made) 7x17 ET55 and 8,5x17 ET52 with 195/45(in the pic still 205/50) and 225/45 rear.
Front calipers are BMW 320, 48mm cups. Adapter plate for the off-set and stud-adaptment

Awesome! I love those wheels :shocked: :angry:

evilC
November 17th 2008, 10:22
................... Though I really like how it brakes now, even with the knowledge it could/will lock up in the rear in the end.. I know I' am weird/suicidal :D

Wally, why not just add a bias valve to the rear line or a balance bar m/c's that would retain all you have achieved and allow you to dial in the correct bias?

evilC

Wally
November 17th 2008, 10:42
That was my second thought Steve ;)
Its just that I have noticed that when fully loaded with family and luggage (i.e. dog) and traveling at speed, braking to a full stop does suffer, which is mainly due to the front brakes (they look just like the orginal cast iron ones, but are only one size bigger) with the non-vented disk.
Therefore I still hope to come up with a solution to mount a nice alu Brembo to the front. Problem there is the spindle, its different from a type 1 so a 944 adapter bearing is maybe not possible...but let me worry 'bout that for a while ;)

evilC
November 18th 2008, 09:05
Wally,

Why not fit the 944 struts c/w discs, the early ones are a straight replacement and even have the speedo cable hole?

evilC

Wally
November 18th 2008, 09:57
Not a straight replacement on a 412

flat
November 18th 2008, 10:15
...its different from a type 1 so a 944 adapter bearing is maybe not possible...but let me worry 'bout that for a while ;)

Wally, they are the same bearings as BJ/SB. I'd like to come up with something if you're up for it? Probably could do a 996 bolt on kit....:)

Lanner

Wally
November 18th 2008, 17:42
Wally, they are the same bearings as BJ/SB. I'd like to come up with something if you're up for it? Probably could do a 996 bolt on kit....:)

Lanner
Yes the wheel bearings are the same, but they are wider apart on a 412 than on a bug (any year).... I have the adapter parts to press in, but I am not sure the bearing houses would have enough material left in the 944 hub to reside in...

Lanner, if you could make me something, I would definately be up for it, spindle/hub wise or caster adjustment ;)
You know the top strut bearings are the same in my 412 as in my late 1303 beetle and I need the extra caster on both. So an adjustable caster top bearing plate is still on top of my list. Caster I have now is between 1 and 2 degrees and needs to to 6-8 or so for optimum straight line high speed stability. I already have the Topline caster+ sway-bar bushings, but its not enough. Mayby because of my M030 front spindles but I dunno.

Untill I have some top strut caster-adjustment parts, I don't dare go any faster than 120 mph or so....
The lowered 412 has the same problem. So two sets of these could make this all a happy world :rolleyes:

Well, you can't blame a guy for trying right? (I know you have other engagements ;) )

Thanks,
Walter

flat
November 19th 2008, 00:04
Well, you can't blame a guy for trying right?

Wally,

No worries, I'm on the project. But I'm in the process of moving and then off for almost a month. So it'll be into the new year before I have anything concrete to show. Also, not sure if I can get that much adjustment out of them. Will have to get out the slide rule and figure it out :-P. Are your cars sleeping for the winter?

In the interim, I could probably come up with a static upper mount with spherical bearing. No adjustment, but fixed at a certain positive caster. Quick, dirty (and probably cheap). You can guinea pig them for me :)

Lanner

Wally
November 19th 2008, 03:27
Wally,

No worries, I'm on the project.

Excellent! tnx for confirming :)

But I'm in the process of moving and then off for almost a month. So it'll be into the new year before I have anything concrete to show. Also, not sure if I can get that much adjustment out of them. Will have to get out the slide rule and figure it out :-P.

If more movement is neccesary for them to work (increase caster by say at least 5 degrees or so), I would not mind filing out the upper strut openings in the body.

Are your cars sleeping for the winter?

The 1303 is, as I always seem to come up with new plans that require engine and trans to be removed from the 03... but the 412 is my daily driver.


In the interim, I could probably come up with a static upper mount with spherical bearing. No adjustment, but fixed at a certain positive caster. Quick, dirty (and probably cheap). You can guinea pig them for me :)

Lanner
That would be a very good idea! I could do that easily in a weekend and have the car realigned with the extra caster afterwards.
Cool! if you could make that happen, pls do so. The details we can discuss by PM or mail ;)

Tnx in advance Lanner!
Walter

ferfre007
May 11th 2009, 10:40
increible!!!! todoss!!! hermosos!!! :eek:

Jim
May 12th 2009, 05:46
Mine has 944 rotors all around with single piston calipers,topline versa struts + sport springs & Gaz inserts fully adjustable in 36 positions,beetle stock master cylinder.CUP 3 wheels 17x7.5 ET52 all around in widened fenders 4cm front and 6cm rear with 5.5 wheel spacer.

http://img19.imageshack.us/img19/9563/imageoyj.jpg

vdubfund
January 17th 2010, 23:09
Heres my 1964 short SA bug
Test fit of 16 x7 fuchs , fat 205/55/16 rubber, and Porsche 944 hubs. FITS!!! :Djust , Big of rubbing .;) A non euro tire would probably help too. Not as wide.

KaferChris
January 22nd 2010, 20:52
987 Boxsters 2.7L wheels 17x8 & 6.5
235/45 & 195/45

Stock late IRS rear, 1-1/4" CCC fenders, 924S brakes w/factory ~19mm spacers

Stock 'Ghia beam with adjusters on front, stock fenders, ~17mm spacers


http://img.photobucket.com/albums/v212/KaferChris/Jeremys%2077/IMG_0053.jpg~original

http://img.photobucket.com/albums/v212/KaferChris/Jeremys%2077/IMG_0051.jpg~original

orange b
February 20th 2010, 20:48
sorry, I can not good write English language, but I try...

I have these wheels under my car...Enkei, produced in 1983, end buy it over 2 years ago, new in the boxes, (found by a porsche dealer)
front: 8J x 16 ET 11. at the back: 9Jx 16 ET 11.
tires : front: BF Goodrich G-force 195/45/16.
Back: BF Goodrich G-force 225/45/16.

http://i109.photobucket.com/albums/n63/beestje1/thumb-mengarage001.jpg~original

http://i109.photobucket.com/albums/n63/beestje1/Pcaps001.jpg~original

1303bug
June 24th 2010, 11:14
any pictures of fuchs wheels on a super ? would they go well ?

Scotts73SB
June 24th 2010, 22:24
wow Orange B that cars gorgeous! Nice job!

SilverBullet
June 25th 2010, 01:14
Nice BBS! Might want to point the Porsche crest to the valve stem.:D

Jadewombat
July 13th 2010, 14:12
Pictured here are ROH 16 x 7" and 16 x 8" rims that were made in Australia. These are on my '73 Super with 924/944 lowering springs, probably too stiff for the street but I'll see what I want to do after autocrossing the car. They weigh:

16 x 7" 19lbs.
16 x 8" 22.5lbs.

I was doing a test fit here, currently I have 928S rims on the car. Will be getting widened fenders at some point, etc.

scardeep
April 20th 2012, 05:53
Anyone could help me to locate and buy a sett of Porsche steel wheels 5,5x15?

http://i1139.photobucket.com/albums/n549/scardeep84/scarbug/D90%20felg/wheels.jpg~original

-Alex-
May 2nd 2012, 16:37
Damn, i had year ago two same/similar 5.5x15 porsche steel wheels, originally used with sparetires.

These wheels sometimes pops out for sale here in finland..


Here is good offset / size table for porsche wheels with pics:

http://www.944racing.de/wheelweights.php

KaferChris
January 18th 2013, 00:29
987 Boxsters 2.7L wheels 17x8 & 6.5
235/45 & 195/45

http://img.photobucket.com/albums/v212/KaferChris/Jeremys%2077/IMG_0053.jpg~original

http://img.photobucket.com/albums/v212/KaferChris/Jeremys%2077/IMG_0051.jpg~original

I'm now looking into these for my girl's 1303 that has stock fenders all the way around - anyone try 17x8 (ET40) with 215/40's on back? Lowered one inner spline.

flat
January 18th 2013, 20:31
Here's a 56 bus I did last summer. 7 and 8" 16 dials. 4" beam with stock micartas turned down for scratch built beam, 4.85" non-flipped hybrid dropped spindles, boxster brakes, straight axle (short) with Wagenswest offset plates. Rear required 5/8 " spacers.

http://i797.photobucket.com/albums/yy251/saugadubz/8BBFD753-CF7E-426D-A498-2410D95B70BC-324-00000014B3412B70.jpg~original

http://i797.photobucket.com/albums/yy251/saugadubz/3433FF69-4ACD-445A-8A13-CCF3847BA7DE-712-000000689B21D077.jpg~original

flat
January 18th 2013, 20:43
Here's a 59 bug I did last summer. I built a 4" narrowed LP beam (with shocks), Porsche 944NA disks all around etc, dropped drum spindles, short axle, 15x7 et52 wheels, stock 944 22mm rear spacers with studs.

http://i30.photobucket.com/albums/c337/gonebuggy/photo-1324.jpg


http://i30.photobucket.com/albums/c337/gonebuggy/photo-256.jpg

flat
January 18th 2013, 21:01
Porsche wheels the easy way: 1" adapters. Stock suspension on 14x5.5s

http://i797.photobucket.com/albums/yy251/saugadubz/2B2DE279-53D9-4C01-9EEE-9353ADC93992-9143-0000072CD4C86841.jpg~original

H2OSB
January 20th 2015, 20:31
Super old thread, but still info to know.

I picked up a set of original phone dials in the early offset (ET23.3). I'm running n/a 944 front discs and coil overs with 2.5 inch springs. Where would the phone dials foul the car? Total back spacing is 112.2mm. Seems like it would fit.

effvee
January 21st 2015, 16:03
Anyone could help me to locate and buy a sett of Porsche steel wheels 5,5x15?

http://i1139.photobucket.com/albums/n549/scardeep84/scarbug/D90%20felg/wheels.jpg~original

I bought a 5 piece centers only about 10 years ago. I plan to have the outter blanks of custom width and offset. I'd hoped for a stock look, but wide rears.

CarreraLook
October 16th 2019, 14:39
Hi all, I've just bought an early '74 1303S/Super Beetle with the 2-bolt upper bearing assembly (but not the rack-steering), which also has the 20mm-each-side wider track. I'd like to run it with Fuchs in 6x16 ET36 and 7x16 (not sure of the ET) but the fronts aren't going to fit without sticking out and rubbing on the wings, especially with a modest 2-3" of front lowering. By my estimation the fronts 'should' be ok on the back-spacing but will stick out around 1" (25mm) more on the bodywork-side.

So the question is, how have other people done it? I've heard that the 3-bolt assemblies can run in the 2-bolt cars (but not vice-versa), but would this also narrow the track to the earlier dimensions? I'm no mechanic - but I'd like to reassure mine that it can and has been done (I see lots of photos of late SuperBeetles running the same set-up). Do you also have to swap control arms, swaybars, spindles, etc... is there an easier way?

Any advice?

wouter1303
October 17th 2019, 04:43
Hi all, I've just bought an early '74 1303S/Super Beetle with the 2-bolt upper bearing assembly (but not the rack-steering), which also has the 20mm-each-side wider track. I'd like to run it with Fuchs in 6x16 ET36 and 7x16 (not sure of the ET) but the fronts aren't going to fit without sticking out and rubbing on the wings, especially with a modest 2-3" of front lowering. By my estimation the fronts 'should' be ok on the back-spacing but will stick out around 1" (25mm) more on the bodywork-side.

So the question is, how have other people done it? I've heard that the 3-bolt assemblies can run in the 2-bolt cars (but not vice-versa), but would this also narrow the track to the earlier dimensions? I'm no mechanic - but I'd like to reassure mine that it can and has been done (I see lots of photos of late SuperBeetles running the same set-up). Do you also have to swap control arms, swaybars, spindles, etc... is there an easier way?

Any advice?


I have an 73 sb (curved screen) with 3 bolt setup. I have cookie cutters (6x15, et36 and 7x15 et 23.3). But the fronts is catching the lower springcup.
Therefore, i purchased the Kerscher coilover set to clear some space. This will give me the clearance i want and do not have to use spacers. I can stay under the standard wings.

So you can go back to the 3 bolt setup, but then the wheels would catch in the lower springcup or even the spring (with the 16"). So the need for the narrow coilovers are a must.

Or you stay with the 2 bolt setup and purchase some wider wings.

But correct me if i'm wrong.

CarreraLook
October 17th 2019, 05:38
Hi wouter, that's really helpful - I didn't know the 6x15 Cookie Cutters had the same ET.

Ok, the narrower Kersher coilovers are probably a 'must' for clearance, but I'd still like to know if I can run the 3-bolt assembly in a 2-bolt car, and if I do, will it also pull the hubs inboard and provide the narrower track I need?

Sorry for being so naive, I have a very poor grasp of the mechanics involved... I just need to advise my mechanic.

Will these Kersher struts be the ones I need?: https://www.machine7.com/product.php?xProd=933

...they're for the earlier 3-bolt cars, will they fit my 2-bolt '74?

wouter1303
October 17th 2019, 09:25
Hi,

As fas is my knowledge goes the diameter of the old top bearing (3 bolts setup) is a it smaller than the new top bearing (2 bolt setup).
So that should fit.

The coilovers are indeed the correct ones, for the 3 bolt setup. Is you want to use these, you will need the 3 bolt setup spindle/axles/swaybars/tierods?

Again, I'm not sure i'm 100% correct.

Other option can be wider fenders/wings al around and use spacers on the back to compensate :p
With the 2 bolt setup it is easier to convert to Porsche brakes in the future :D