GermanLook Forums

GermanLook Forums (https://www.germanlook.net/forums/index.php)
-   Project Builds (https://www.germanlook.net/forums/forumdisplay.php?f=67)
-   -   '56 rag with a twist (https://www.germanlook.net/forums/showthread.php?t=11020)

fahrvergnugen July 29th 2012 05:22

almost there.
http://www.keversite.nl/fotoalbum/fotos/119120.jpg
http://www.keversite.nl/fotoalbum/fotos/119121.jpg

Paul.

fahrvergnugen August 15th 2012 15:48

Some more weight saving, once I am finished with this "single skin" hood it will look original.
http://www.keversite.nl/fotoalbum/fotos/119351.jpg
http://www.keversite.nl/fotoalbum/fotos/119352.jpg
http://www.keversite.nl/fotoalbum/fotos/119353.jpg

Paul.

Wally August 15th 2012 16:08

Fits like a glove!
Do you mean you took out the inner skin of that front hood?

fahrvergnugen August 15th 2012 16:15

Quote:

Originally Posted by Wally (Post 84537)
Fits like a glove!
Do you mean you took out the inner skin of that front hood?

It's a fiber glass hood Wally, jou did it so it must be good:D

Wally August 15th 2012 16:19

Ah! Cool, that is indeed light-weight. Like!

fahrvergnugen August 16th 2012 15:37

Quote:

Originally Posted by Wally (Post 84544)
Ah! Cool, that is indeed light-weight. Like!

;)

fahrvergnugen September 6th 2012 15:36

The first attempt failed, so here's the second attempt of repairing the Right 1/4 panel.
after some hammering and grinding.
http://www.keversite.nl/fotoalbum/fotos/119818.jpg

Hammering the oval shape in it.
http://www.keversite.nl/fotoalbum/fotos/119819.jpg

Starting to look original.
http://www.keversite.nl/fotoalbum/fotos/119821.jpg

Paul.

fahrvergnugen September 16th 2012 15:15

After the new sheetmetal was in shape, It was time to make "the notch"
http://www.keversite.nl/fotoalbum/fotos/119999.jpg

Made a notch and tacked it in place, it looks a bit odd but the shape is like the original.
http://www.keversite.nl/fotoalbum/fotos/119997.jpg

And again some trial fitting.
http://www.keversite.nl/fotoalbum/fotos/119998.jpg

Paul.

fahrvergnugen October 13th 2012 08:52

Next week I can Finlay work on the car again. the trailer is completely level and the car is welded on it at the wright height.
http://www.keversite.nl/fotoalbum/fotos/120528.jpg

Paul.

fahrvergnugen October 18th 2012 15:46

Finlay did some work to the car again :)
http://www.keversite.nl/fotoalbum/fotos/120711.jpg
http://www.keversite.nl/fotoalbum/fotos/120712.jpg

Paul.

fahrvergnugen October 24th 2012 15:50

1/4 panel is welded up now. IRL it's pretty strait, even without filler.
http://www.keversite.nl/fotoalbum/fotos/120927.jpg

Also started repairing the innerwing, here it's almost finished
http://www.keversite.nl/fotoalbum/fotos/120928.jpg

Paul.

Stevo_L October 24th 2012 16:31

:goodjob:

fahrvergnugen October 27th 2012 12:14

Innerwing is done.
http://www.keversite.nl/fotoalbum/fotos/120976.jpg

Paul.

NO_H2O October 28th 2012 04:57

A nice fit and welding job again. Nice work.

fahrvergnugen November 28th 2012 16:48

Is wasn't easy to get the dash near the doorpillar. I finally managed it and it looks good if I say so my self.
http://www.keversite.nl/fotoalbum/fotos/121673.jpg

Paul.


All times are GMT -4. The time now is 03:09.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved