Due to the fact that I have to use X-joints (don't know what they're called) in the steering, the steering column had to have an extra bearing. So I made a bracket, shortend the column and mounted the bearing. I am pretty pleased with it.
http://www.keversite.nl/fotoalbum/fotos/125701.jpg
http://www.keversite.nl/fotoalbum/fotos/125702.jpg

Paul.

Looks good.

Thanx.

I didn't like the way the gearbox was hanging (i did this 2jrs ago) so it was time for "plan B".
"Plan B" is mounting the gearbox higher, further inwards and solid.

http://www.keversite.nl/fotoalbum/fotos/125833.jpg
http://www.keversite.nl/fotoalbum/fotos/125834.jpg

Back mount are ready, now it is time to do the front.
Paul.

Getting closer to a roller!!!

Jason

Yes, closer and closer;)

Also made a solid mount for the clutch side.
http://www.keversite.nl/fotoalbum/fotos/125917.jpg

Paul

Won these today on Evilbay, Spax Coilovers.
http://www.keversite.nl/fotoalbum/fotos/126015.jpg

Paul.

I Wasn't happy with the first gearbox mount. So it was time for plan B. The new frame horns.

http://www.keversite.nl/fotoalbum/fotos/126114.jpg
http://www.keversite.nl/fotoalbum/fotos/126113.jpg

Paul.

The frame-horn replacements are ready, when the body goes of I will make the def. welds.
http://www.keversite.nl/fotoalbum/fotos/126176.jpg

I widened the gearbox mount, this will make it stronger and improve the looks of the roll cage.
http://www.keversite.nl/fotoalbum/fotos/126177.jpg

Paul.

Also made a start on the cage today. I want to be able to use the backseat. this is my try of a rollcage with a backseat.
http://www.keversite.nl/fotoalbum/fotos/126178.jpg
http://www.keversite.nl/fotoalbum/fotos/126179.jpg

Paul.

Hi

Loving this build, keep the photos coming.

I made this reply because sometimes when you post things and you don't get a reply it seems like your talking to yourself.

I really like what you did with chassis forks.

Steve

Thanks Steve. I know what you mean, but I know people are watching.

Paul.

Yes, I am lurching this thread, keep up the good work!

Thanks Gerrelt, I will.