The new (used) coilovers where in. I just had to try.
This needs some mods.
http://www.keversite.nl/fotoalbum/fotos/126224.jpg

small cage steps. The cage will be welded to the body, this way it can be separated from the pan.
http://www.keversite.nl/fotoalbum/fotos/126225.jpg
http://www.keversite.nl/fotoalbum/fotos/126226.jpg
http://www.keversite.nl/fotoalbum/fotos/126227.jpg

Paul.

Can I suggest starting the A-pillar bar farther forward? Having it that far back makes it kind of in the way getting in and out of the car. I just hate banging into my car with my feet!

Just my $.02:)

A Pillar base

A Pillar base

Jason

Hi Jason,

Any suggestion is welcome. I am building a cage similar to what Jim Smith made. (Cotsweld race cars) http://cotsweld.co.uk/album/cotsweld...age/index.html

Paul.

Time to start on the fire wall, not my favorite job but it has to be done.

The fire wall will sit 6cm higher as original, so I cut 6cm of the top.
http://www.keversite.nl/fotoalbum/fotos/126273.jpg

Because of the innerwings I have to make it wider as well
http://www.keversite.nl/fotoalbum/fotos/126272.jpg

We're getting there.
http://www.keversite.nl/fotoalbum/fotos/126271.jpg

Paul.

I need a pair of these, to mount my coilovers to the alu trailing arms.
http://www.racersedge-inc.com/racers...pen&id=11.3.14

All addresses are welcome, Thanks.

Paul.

Weber access.
http://www.keversite.nl/fotoalbum/fotos/126375.jpg
http://www.keversite.nl/fotoalbum/fotos/126376.jpg

Paul.

Love the new frame horns. That is what I am doing with my Manx STi because I have to clear the 930 transmission. Very nice build, thanks for the photo inspirations!

Thanks and you're welcome.

To follow the rules while building my cage I had to place the seats first.

First I slammed the original seatframe.
http://www.keversite.nl/fotoalbum/fotos/126665.jpg

After that I mounted the 914 frame on top.
http://www.keversite.nl/fotoalbum/fotos/126666.jpg

Next step was placing the seat.
http://www.keversite.nl/fotoalbum/fotos/126667.jpg

Now the 914 and original frame can move foreward to have enough access to the rearseat.
http://www.keversite.nl/fotoalbum/fotos/126664.jpg

Paul.

Both seats are in. doesn't look like much. But this has cost me several hours. The original frames are slammed, narrowed, shortened and placed in a differend angle. just for the eye, I closed the side of the frames.
http://www.keversite.nl/fotoalbum/fotos/126822.jpg
http://www.keversite.nl/fotoalbum/fotos/126821.jpg

Paul.

I've bin doing small stuff while I'm waiting for the cage material to come in. Today I have bin modeling the door gab. Due to an accident in the past, the door didn't line up like I want it to do.

Start up the grinder again.
http://www.keversite.nl/fotoalbum/fotos/126953.jpg

After some hammering.
http://www.keversite.nl/fotoalbum/fotos/126954.jpg

Paul.

Looking good mate,

I'll be over the soon for that beer and a chat.

:-)

Cool, when do you think youre here?

The rollcage is in, only thing left is mounting it :-\
http://www.keversite.nl/fotoalbum/fotos/127159.jpg

Shall I transform it in to a delivery van or keep it original ?
http://www.keversite.nl/fotoalbum/fotos/127160.jpg

Paul.