No progress to report today, other than the last bits for my engine will be delivered on Friday :D Expect pictures!
Pics of the gearbox with its mounts on and the carbs... http://members.lycos.co.uk/vdubhub/a...29-gearbox.jpg Thats Murphy in the background, our Old English Sheepdog. He is acutally related to the Dulux dog. Pair of brand new Weber 44's. Nice velocity stacks too. http://members.lycos.co.uk/vdubhub/a...03-29-carb.jpg http://members.lycos.co.uk/vdubhub/a...-CarbsDone.jpg The airfilters have now been treated with the K&N oil so have the lovely red colour. Wrapped in plastic bags and put into storage until needed. Cya, Sam C |
looks like you are having some fun Sam. not a great testiment, but i am running a RAT 2316 with the 3-bar cup and not running an intermediate or welding the seams and no issues as of yet. i went drag racing and did about half dozen really hard runs with no issues. it is early though. if you have everything out and can do it, might as well while you are there. that is pretty cheap insurance.
|
Well, have unpackaged all my engine bits, taken photos of everything! Lots of really nice bits.
A few photos to wet everyones appetite! http://members.lycos.co.uk/vdubhub/a...2-Ceramics.JPG Ceramics http://members.lycos.co.uk/vdubhub/a...02-ConRods.JPG Conrods http://members.lycos.co.uk/vdubhub/a...-JEPistons.JPG JE Pistons http://members.lycos.co.uk/vdubhub/a...rtBuilding.JPG Half case on engine stand Going to go and start sizing things up today! Need to finish watching the rebuild dvd (got 2 hours into it, only another 1 to go!!!) then watch the DTM dvd, then start building it! Cya, Sam C |
More pictures:
Cleaner bench: http://members.lycos.co.uk/vdubhub/a...eanerBench.JPG Clearencing in the case (as the engine is stroked): http://members.lycos.co.uk/vdubhub/a...learencing.JPG Cya, Sam C |
http://www.tyresave.co.uk/alloypix/octanebk.jpg
Ordered and paid for, should be delivered saturday... just need tyres :D Expect pictures :D Cya, SAm C |
looking good mate.looking forward to seeing this in the flesh,going to any shows this year? we should try and have a "gl" section at some of the shows :)
hae a 2056 with about 165bhp and a 3 piont brace and intermedate mount,have mad wheel hop.going with steel mounts all round soon. cheers rob |
Quote:
looking good sam, like the choice of wheels! nice deviation from the "norm" |
Quote:
Over here, we have a slalom competition at the bug out. those are always the highlight of the show for me. |
Hi everyone.
Sorry for the lack of pictures, forgot the camera. Have fully rewired the Passengers door this weekend, need to do the drivers door next (shouldnt take as long now I have worked out what to do)... Thats the central locking hooked up (5 wires), Electric window control box (5 wires), Electric window motor (2 big wires) and the Alarm led next to door pin (2 wires) 14 wires in total... And I have succedded in doing it such that the wires are totally hidden from view when shut, and very discrete when open! Pictures soon... Will take some when doing the drivers door! The wheels are far nicer than in the pictures... Sorting tyres this week, so might have them on the car next weekend... Anyone want to buy 4x 15x5.5 wolfrace enigma LE, Set no 44 of 400 (have official certificate) complete with goodyear eagle F1's... 4x100 et 38 Have also done some more filling and sanding, reinstalled both the electric window brain and the central locking... Electric window brain was under the dash, but was far to complex and didnt fit nicely, so disconnected all its wires, relocated and rewired with nicely soldered and heatshrinked connections. Cheers, Sam C |
Great stuff Sam, c'mon where are those pics of the wheels??!!
I bet you will certainly enjoy the RAT engine once assembled - it will be loads of fun I am sure. :agree: |
Quote:
Right, I have decided NO wheel pictures until there on the car :p ;) Sorry to disappoint! Sam C |
You are a tease - you know that don't you?? :laugh: :laugh:
|
Quote:
Tyres should be here tomorrow, so should have them fitted by the weekend. http://www.tyre-pictures.com/Goodyear/GSD2.jpg Goodyear Eagle F1's... Cya, Sam C |
Very nice :agree:
|
Wheels and tyres are on:
http://members.lycos.co.uk/vdubhub/a...0NewWheel2.JPG http://members.lycos.co.uk/vdubhub/a...0NewWheel1.JPG :D VERY happy with the overall effect! The car is now about 1 inch higher off the ground which will help LOTS with speedbumps, the wheels fit perfectly, clearing the bumpstops on the rear by 5-10mm, it all tucks nicely under the arches too (STOCK size wings!) 17x7, 215/45-17, et 38... I have slimline struts on the front (wouldnt of fitted otherwise) but NO OTHER MODS for them to fit! (Other than drums/disks drilled to 4x100) Cya, Sam C |
All times are GMT -4. The time now is 22:40. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved