GermanLook Forums
Page 21 of 27 « First 111920 21 2223 Last »
Show 40 post(s) from this thread on one page

GermanLook Forums (https://www.germanlook.net/forums/index.php)
-   Project Builds (https://www.germanlook.net/forums/forumdisplay.php?f=67)
-   -   '56 rag with a twist (https://www.germanlook.net/forums/showthread.php?t=11020)

cookvw January 20th 2014 17:33
A better pic of where both ends of the tube that supports the top of the Coilover of where they tie in at would be awesome.

fahrvergnugen January 22nd 2014 16:19
Quote:
Originally Posted by cookvw (Post 87881)
A better pic of where both ends of the tube that supports the top of the Coilover of where they tie in at would be awesome.
I am sorry this was the best pic I had.
The gearbox has a special mount (bellhouse side). from this mount there are tubes going to the top of the main hoop. the torsiontube is narrowd therefore the body mounting point is on the inside of the innerwing (nrmally on the outside). I made the second tube from this body mounting point to the first tube (this makes a triangle). The schok is mounted to the tube that is going from the body mounting point to the first tube. Stil with me?

fahrvergnugen January 22nd 2014 17:06
Starting to look like a real cage.
http://www.keversite.nl/fotoalbum/fotos/130200.jpg
http://www.keversite.nl/fotoalbum/fotos/130201.jpg

Paul.

Wally January 22nd 2014 17:15
Cool! That will deffinately be 'Spa-froncorchamp approved' :-)

fahrvergnugen January 23rd 2014 15:57
Quote:
Originally Posted by Wally (Post 87896)
Cool! That will deffinately be 'Spa-froncorchamp approved' :-)
:D Thanks.
I am following the drag race rules (rules received from Rojo Racing) as good as possible.

fahrvergnugen January 25th 2014 16:23
Another pipe added.

http://www.keversite.nl/fotoalbum/fotos/130242.jpg
http://www.keversite.nl/fotoalbum/fotos/130243.jpg

Paul.

fahrvergnugen January 29th 2014 09:03
new pipe update.

http://www.keversite.nl/fotoalbum/fotos/130270.jpg
http://www.keversite.nl/fotoalbum/fotos/130271.jpg

Paul.

Rule09 January 30th 2014 11:46
Everything looks very good!

fahrvergnugen March 15th 2014 09:54
Started on the cage part in the sparewheel area. First I made it with plastic pipes.
http://www.keversite.nl/fotoalbum/fotos/131148.jpg
http://www.keversite.nl/fotoalbum/fotos/131149.jpg

Then copied it from steel.
http://www.keversite.nl/fotoalbum/fotos/131151.jpg

Attached to the cage inside.
http://www.keversite.nl/fotoalbum/fotos/131150.jpg

One down, one to go.
Paul.

SuperRSi March 15th 2014 14:42
Nice! I am getting close to the cage stage of my build so you help inspire me.

fahrvergnugen March 16th 2014 15:38
Quote:
Originally Posted by SuperRSi (Post 88119)
Nice! I am getting close to the cage stage of my build so you help inspire me.
Thanks,:cool:

fahrvergnugen March 19th 2014 16:09
Bended the 2nd pipe. just a little fitting and it is ready. one pipe to go before the welding can start.
http://www.keversite.nl/fotoalbum/fotos/131245.jpg

Paul.

ricola March 19th 2014 16:12
Can you get the fuel tank out OK, looks close! The bends look good, what sort of bender are you using?
Rich

fahrvergnugen March 19th 2014 17:09
Quote:
Originally Posted by ricola (Post 88127)
Can you get the fuel tank out OK, looks close! The bends look good, what sort of bender are you using?
Rich
Hi Rich,

Not sure about the tank yet. First I have to shorten the right tube a bit and tack-weld them.
The bender is just a simple hand (hydraulic) pump.

Paul.

Gerrelt March 20th 2014 13:52
Impressive work!


All times are GMT -4. The time now is 04:50.
Page 21 of 27 « First 111920 21 2223 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved