http://i10.photobucket.com/albums/a1...3.jpg~original
http://i10.photobucket.com/albums/a1...k.jpg~original
http://i10.photobucket.com/albums/a1...0.jpg~original
http://i10.photobucket.com/albums/a1...2.jpg~original
http://i10.photobucket.com/albums/a1...2.jpg~original
http://i10.photobucket.com/albums/a1...9.jpg~originalhttp://i10.photobucket.com/albums/a1...8.jpg~original
http://i10.photobucket.com/albums/a1...8.jpg~original
;););););)

I love it.

new to this, but was thinking of having my front wheels machined down an inch to 16 x 6 and fitting smaller tyres, what do you think?

O.K your new to this , but unless your having them narrowed ,i.e cut in half machined and then re welded ,how do you propose to machine an 1"off your rims, first off check your steering box, tie rods and try smaller tyre 195x45 ;)

Thanx for the reply - will check steering box and tie rods - also going to get some smaller tyres...
I should have said that a guy is going to cut the wheels in half, machine them and then re-weld them...
Cheers for the info.

Little bit of an update with 02, got the side vents cut out going for our carbon versions this time, also changed my mind on the ally 944 a arms, going early 944 steel with our uni ball+coil over set up, got that made and trial fitted with some old Konis for now............
http://i10.photobucket.com/albums/a1...7.jpg~original
http://i10.photobucket.com/albums/a1...8.jpg~original

Personally I believe that the early 944 arms are stronger than the later ones. Lee the project looks great. The carbon side vents will look great. Have you decided on the color?

L.A.P. does very fine work. Love it.

Slight change of plan on the colours for this car, i got to be honest and say the green was a cover up, you lot will still have to wait for it though, you may not like it you may love it, either way iam going for it:lmao::lmao:

What do the side vents connect to?

They route air into the engine bay,allowing the fan to suck in more cold and fresh air.

+ it looks the works.

Yeah,they give me a stiffy aswell. :D I had my car painted already early on in the project,otherwise I would have put them in also.I wanted to run carbon fiber pipes from the vents into the engine bay...

Right .... not done much this week on the 02 or the split bug , next week finish the cage on the split bug, could,nt be arsed with body work this week, so made all the carbon for the 02 project and other parts for customers, also made the 02 front wings and rear valance in grp, also made another seat in grp............................................... ............

http://i10.photobucket.com/albums/a1...9.jpg~original

http://i10.photobucket.com/albums/a1...0.jpg~original

http://i10.photobucket.com/albums/a1...1.jpg~original

http://i10.photobucket.com/albums/a1...2.jpg~original

http://i10.photobucket.com/albums/a1...3.jpg~original

Might put a carbon spoiler on my daily really suits it ......
http://i10.photobucket.com/albums/a1...5.jpg~original
http://i10.photobucket.com/albums/a1...4.jpg~original

What are you thinking is the best solution to adhering the spoiler to the roof?

Jason