Monthly meetings in Oakville
We will meet every 2nd Tuesday of the month at the Duck and Firkin (or so) at Ford Drive and Royal Windsor at 7:30 PM.
Directions: Coming from TO on QEW: Exit at Ford Drive and go south (left) on Ford Drive. Stay on Ford Drive until you pass Royal Windsor. The bar is on your right in that little strip mall. Coming from Hamilton on QEW: Exit at Royal Windsor and follow the street. You will pass the Ford plant on your left. Once you get to Ford Drive make a right. you will see the bar on your right hand side. Coming from Brampton on 403: Exit at Upper Middle Road/ Ford Drive. Make a right on Upper Middle Road. At the next light make a left on Ford Drive. Continue on Ford Drive until you pass Royal Windsor. You will see the bar on your right. The bar is located on the other site of the Petro Canada gas station which is located on the south/east corner of Ford Drive and Royal Windsor. Hope to see you all there. Let us know if you can not make it. Alex |
For September 2003 the meeting will be on the 9th (2nd Tuesday).
I just thought that some would need the reminder. The last two meets were great even though only a few showed up. Alex |
I might be there .. depends on if the new addition to the family will let me be there ! :D
Sandeep |
I'll be there.....
Rob. |
so will i
|
who is coming on the 14th??
|
I'm planning on being there.
Rob. |
I will be there as well.
Rob, can you bring the bumper and rear kick panel covers ? Alex, Can you bring the 911 headlights ? I got mine from CIP1 today and you are right .. two fluted lenses, one for the headlight, and one for the cover ! So I will buy the 911 setup from you. All, I have a set of early (66 and down) new headlight assemblies (American) and a set of 911 lenses and seal (Like on the CIP1 website) I'll bring them with me, incase anyone wants to buy them for my cost, otherwise I'll be shipping them back. Thanks Sandeep |
Hey Sandeep,
Yeah I'll bring the parts. Jamie, let me know if you are coming and I'll bring the steering wheel. Rob. |
i will be there
|
I'll try to get the time off work, I definetly would like to be there.
Jamie |
Meeting
Sorry guys I will be away in Beijing, China to visit with my
daughter on the 14th. but will attend next meeting and give you all an update on the progress of the Super Beetle. Getting ready for the paint shop later this month, then the slow process of putting her back together. (Any ideals on time needed ?) Sandeep thanks again for the opportunity to get together the week and "feel" a type IV powerplant; really enjoyed the time and the discussion. I'm getting closer to planning mine type IV and giving lots of thoughts to what my approach will be for next winter and also the GL look, already have some parts including the 944 front brakes and 901 5 spd. tranny which I am thinking of making use of after some consideration for the gear ratios. Thanks again and all the best guys. Allan (Insurance Guy) |
sandeep, clkwrk, you guys bringing the vdubs? i am.
|
I will be there.
I will bring the stuff :D. Alex |
I'll bring the 'dub.
Pete, Are you giving any rides in your beast ? Can I buy a ticket ? :D I'm thinking of buying some straight cut cam gears but am not sure how loud they get. (Is that a good excuse or what :silly: ) Sandeep |
ill be there, so will the ghia (scud heater pumpin the hot air)
:D |
Quote:
and bry i will have my sweater, jacket, hat, and gloves, while you sit all toasty in your heated ghia:doh: |
I'll be rubbing my hands togeather for heat at each stoplight on the way to the meet ! :D
Sandeep |
Raining like a beeotch !
I'll be bringing the Accord ! Sandeep |
Hey Guys well Who's you for a Dec Pub Night??
in a Few weeks gives everyone some time to get the night off lol Later Chris. |
Tuesday Dec 11th?
|
Hey Yup I'm in for the Dec 11th
Alex please ZBring the Deck lid Pins if your coming Pete Need CF PArts :) Don't forget to bring them lol Rob I Still have that Glove Box for ya too if your Going to Drop in too Chris. |
I'll try to be there.
Rob. |
Hey Rob if you end up Showing Up you Need the Glove Box part but do you need a glove box Door too is So I'll brin it too. it's yours
Chris. |
Quote:
I plan on coming out this week, see you then. Rob. |
I'm in for the 11th. I work until 8 so i'll see you guys around 8:30ish
Chris I'll bring your pins, if you bring my $10 :D See yas next week Alex |
Hey Lanner,
You still interested in the gasheater and heaterboxes ? I can bring them next week if you want. Rob. |
Rob,
Yeah bring them please. Lanner |
Looks like it will be a good turnout:
flat Rob gonebuggy chug_A_bug TunedPerfection Alex (wonder how that NSU is coming along?) Andrew petevw Sandeep? CLKWRK? |
I'll be there.
Btw if anyone has any clean heavyweight (alu core) heater boxes bring em, I'm looking for a set. Bry |
Sorry Guys,
Can't make it. I'm welding up my 915 mounts tonight and tonight is the only spare night I have this week. Sandeep |
BOOO, work stepped in and changed my plans till 11pm :angry:
Damn you video game industry! Bry |
Hey Brian,
Are you still looking for a set of heaterboxes ? I have a brand new set. Lanner took a look at them but he's going for the high performance ones. Not sure if this is something you need as well ? Rob. |
Hey Rob,
I am running the lightweight street max boxes (1.5" id) on my big motor, but the other one can use the stock size boxes, I have an extra set of stock lightweights as well but I prefer the "extra heat" i get of the heavyweights (alu core). what condition are they in, price? Cheers, Bry |
Bry,,
They are pretty much brand new. Lanner will bring 'em to the next meet so you can take a look at them and we'll talk about the price then as well. They come with the flex hoses as well. Rob. |
Speaking of next meet, how does Jan 11th sound?
Alex, i'll bring the Webasto.;) |
Sorry, I'm in Calgary that week :(
Rob. |
Rob, how's the week after?
I messed up the date, Jan 11th is a Tuesday in 2007. So we're looking at the 8th or 15th? |
It looks like I'll be in town the 15th, so that would work for me (if they don't change schedules on me).
Rob. |
hey I'm Game for the 15th
and Rob I know that you Said that you didn't have Door panels well Since I have Cf ones now I don't really need the Stock ones Soo you can Have Firsties on them they are in Great shape too. Chris. |
All times are GMT -4. The time now is 11:21. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved