June Meet
What's a good day for everyone?
Tues 12th? Tues 19th? Saturday 23rd is VW day at Toronto Motorsport Park-- 1/4 drag Sunday 24th is the June Jitter Bug--show Who's going to be rolling in their Vdubs? Should take a group pic, 'cause it's looking like quite a few will be on the road. Pete |
the 19th works best for me. Starting next week i work the evening shift, so i wont be able to make it until the 19th. BUUUUUT my car may not be there, because the motor may be out so i can put my new pro-street tranny in for the drag day. The darn thing is supposed to arrive a week before the drag day!:(
We'll have to play that one by ear. But either way I agree Pete, that a nice group pic is in order. I'm not much of a photographer, but i'll bring my camera. Alex |
I'm down on the 19th. Not to hijack the post, but there is a watercooled event this sunday in the #10/401 area that we are gonna crash. (http://forums.vwvortex.com/zerothread?id=3179621)
Who's down? Post here or call me.... Lanner |
hey well I'm game for Both dates don't matter to me
and I will have my Dub there :) and the Group pic that would be Sweet I have a really Nice cam too... Chris Lanner I'm So in For Crashing the H2O's lol |
Quote:
Alex, you can get the re/re trans done in a couple days. Don't go to work, call in sick. :D |
I vote for the 19th ... it will give me time to make sure the car is 100% drivable.
I'd love to crash the H2O meet but I'll be there with my brother in his A6 2.7T. I have a 7.2 MP camera and mini DV camcorder .... I'll bring them with me to the meet and can burn a DVD with my laptop. Where are we meeting up and at what time ? I'm really looking forward to this summer !! except it is already here and the bug is still in the garage !!! :mad: Sandeep |
We did springfling today. Pretty crazy. We had 7(?) cars rolling, which is very nice. Thanks for all those who came out, and for those who didn't, you missed this:
http://www.bugfest.ca/pics/springfli...gfling2007.htm June jigger bug is the next big one, make sure you can make it. No excuses. Lanner |
Damn! awesome turnout! sweet rides too! wish i could of been there, but i was helping chris (chug a bug) with his car today, so i couldnt make it.
i will DEFINITELY be at the jitterbug (drag day as well) Alex |
Sorry Lanner, looks like a good time.
I got the motor tranny back in, fired it up and drove around the block last night. The engine is falling on it's face at 1400rpm with a little throttle. Like turning it off. I can rev it higher if i just touch the pedal. Gonna drain the gas(since November) tommorrow, and put some fresh stuff in. So close, yet so far.:mad: You guys have any ideas? |
Looked like a good time ... thanks for the pics. My little guy had a fever so I had to stay home with him. I got some work done on the bug while he was sleeping though ;)
Filled the gearbox with swepco 201, and am programming the megasquirt with new values. Hope to fire it up on Wednesday ! :D I'll be at the drag day on June 23rd as well .. not to sure how the 901 will handle drag racing though :( Pete ... drain the gas ... have you checked the idle jets ? You're working with carbs now ! Sandeep |
Quote:
|
Well they switch the shifts around for me at work, so i'm only working until 8 now. So the 12 OR the 19th work for me, my car definitly wont make it on the 19th if thats what we go with. (pullin the motor and tranny..)
And Pete, I can help you out with your car if you want. We'll have to figure out a time. the next few weeks are a bit nuts. This saturday Chris (chug a bug) and I are pulling his motor to reset the endplay, and do a little more tuning. If your intersted we'll figure something out. Alex |
Thanks Alex, i'll let you know,
Spent some more time on it today before going to work. Thinking it might have been the stock SVDA dizzy, i borrowed a 009 with Pertronix and coil from Greg and swapped it in. Fired it up, no difference. Went to the local Staples and bought the compressed air in a can for blowing out keyboards and stuff. This air in a can is expensive:eek: , didn't want to blow out the jets with the air compressor as i don't regularly drain it. Pulled the mains and emulsion tubes and blew them out. To pull the idle jets the stacks and linkage plates need to come off. So while pulling them i dropped a washer down the carb! There it sat on the butterfly, no problem. Grab the magnet and nothing. Damn...stainless washer:( So with a small screwdriver, coat hanger, and some profanity i got it out. Blew out the idles, and reinstalled. Ran out of time, had to leave for work, so fired it up and it sounded different and a little better revving. I hope after the blowing of the other idles in the morning, it should be good. *fingerscrossed* After almost 6weeks, and 4 engine pulls, i'm thinking: so much for tossing in the stocker, driving it, to work on the split. :banghead: Need to make mention of Greg over at tunedperfection.com for helping me out over the past while. He's provided me with exceptional service and parts. Always going out of his way to do whatever he can. From overnighting parts, to the latenight pickups. Always, just one more part away, from driving it. Can't say enough about him. Pete |
Soo then When is this Meet going on?? the 19th your next tue ??
thanks Chris. |
19th
They super may not be there.... I've given up on trying to get the carbs to work. So today, expedited$$ them down to Art Tharen at aircooledengineering for a rebuild and setup. Hopefully i get them back for the drag/show weekend. If i don't get them back in time, or they don't work, i'll seriously consider liquidating all my ACVW stuff. I'm at my wits end. :mad: |
ok Cool it's the 19th
ya I don't think i"ll have my bug there now I have to do a re-build got alot of end-play. I'm going to rip the motor out this week and run it down to Johns on Sat. BTW Pete Don't Give UP Chris. |
I may not be there on the 19th ....
I've been fighting a lack of oil pressure at start up for about 3 days now. I've checked everything I can without pulling the motor and splitting the case. Does anybody have a split T4 case I could borrow for a few days ... I need to have a look at the distributor side to see where the oil goes when it leaves the pump pressure side. I woild be pouring oil into the galleys and viewing the results ... I would pressure wash and clean the case and return it in about 2 days. Only 2 weeks left till the meet :( Sandeep |
hey Sandeep
I have a T4 case that you could use, where and When I can Meet up with ya let me know Chris. |
Thanks Chris,
What is your schedule like ? I'm at Derry/Mississauga Rd in Mississauga during the day and in West Brampton in the evening. I'd like to get the case ASAP ... PM me and let me know where you want to meet and what time. Sandeep |
Thanks for the offer to use the case Chris. I have found the problem and know how to fix it, so I won't be needing the case. Hope to have the engine back in the car and fired up by the weekend.
I'm trying hard to be at the meet with the bug !! Sandeep |
No Problem Buddy anytime, my T4 motor wont be getting Started timme next year anyways So its just going to be Sitting around lol :(
hope to See it at the Meet :) Chris. |
Sandeep, sounds like everything is going to work out for you.:agree:
My carbs are off to get rebuilt, so after many hours in the garage the past month and a half, i'm blowing off some steam. Off to Montreal Thurs night for the Formula 1 festivities.:clap: Have tickets Fri -> Sun at the "Casino" hairpin. :D |
Who is a CAA member?
Can someone get me maps of Ontario/Quebec from CAA which should be available to CAA members? I also need the Eastern Canada Camp Book if possible. I have freind coming from Germany on the 23rd. They are renting a RV to take a tour of Eastern Canada for 2 weeks. I really appreciate the help. See you on the 19th, Alex |
Hey Alex my Buddy Eric is a Member I'll See what he can do
Chris. |
Thanks....I appreciate it.
Alex |
I've just received some brakeline components and oil hose in the mail ... will be installing on the weekend and probably be tuning the EFI on the way to the meet !
Gotta love the last minute projects ! :D Sandeep |
haha YAAAAAA can't wait to See your car :)
Chris |
Tomorrow night. Who's driving their VW?
My carbs are still in Utah.....:mad: |
maybe.... maybe.....
Pete, why are your carbs in utah?! Alex |
I'm still 4 AN fittings away from driving the car :bawling: I hope Performance Improvements has these or I will have to rig something up with Parker fittings.
Have to install the rear apron and mount the radiater for the A/W intercooler still and then give it a road test. If the bug is not ready for the meet, I will be there with the honda :( I will be ready for the Drag Day at TMP and the Jitter Bug though. Sandeep |
Quote:
Art Tharen: aircooledengineering.com. What's going on with your trans. |
gotcha,
Tranny is here, right now i'm putting in the kafer brace (i ended up going with a bugpack one, didnt have the time to do my own:( ) Then the tranny and mohr mount go in repack the cv's put on new boots, and lastly the motor. I'm tired as fook from a busy weekend, so i dont know how much work will get done tonight. i think i may take off thurs and or friday to finish it up though. Doubt the car will make it to the meeting tomorrow, but whoever comes out to the drag day will get to see and hear it! fingers crossed for low 14's! Alex |
Quote:
|
no idea, was hoping to hit up the truck scales but havnt yet. i know it can't be that much with my 160 pound fat ***.
Alex |
hey things came up I'm not going to be able to be there
Sorry Alex My buddy didn't end up getting a Chance to get the Maps he's been working 14 hour days Chris. |
Can't make it?! bummer!:( When can i grab my lights off you bro?
Alex |
All those late nights in the garage over the last 2 weeks to get ready for this meet and I have a #@$%@# oil cooler leak :mad: The RX7 cooler is leaking from a small crack near the bottom fitting .. its a quick drip while the engine is running.
Sorry guys ... I'll have to miss this one while I get the cooler repaired. I'll be ready for the drag day and JJB ... fingers crossed :) Can somebody post what the plan is on where to meet for the cruise to the drag day and JJB ? Thanks Sandeep |
Yeah whats the plan?
I would like to meet up with you guys. I have been super busy since taking posession of my new place in St Catharines. I need a vw fix! :D bry |
good question! i'm still up in the air about the JJB, but DEFINITELY at the drags. we should organize a cruise down for sure. i want to be there for 10
who all is going, and who all is racing? Alex |
All times are GMT -4. The time now is 21:49. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved