black trim
how do people black there trim out? i hate the chrome.
|
Most of the trim is polished/anodized aluminum. Rough it with some 225 grit, spray some etching primer, and finish it with bumper paint of John Deere Blitz Black... ;)
http://www.kafertek.com/images/galle...smbly-0023.jpg |
thats all i did
rubbed down, etch primed and sprayed with gloss black enamel still looks as good today as when it was done years ago |
I would like to spray my headlight trim rings satin black. Would the 225 paper be sufficient to scuff the chrome down? Or should I Use a harsher grit?
|
225 should do it. You simply want to dull the shine to give the etching primer something to grab... ;)
|
sending mine off to be powder coated along with bumpers, and all interior trim
|
I used a wire brush drill attachment. Didn't take long to scuff the chrome down:)
|
i used one in my angle grinder but only on the bumpers
i think the rest of the trim is too delicate my body trim is only aluminium and cos i have semi sealed headlights the chrome rings are plastic |
All times are GMT -4. The time now is 12:32. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved