black trim
 

how do people black there trim out? i hate the chrome.

Most of the trim is polished/anodized aluminum. Rough it with some 225 grit, spray some etching primer, and finish it with bumper paint of John Deere Blitz Black... ;)
http://www.kafertek.com/images/galle...smbly-0023.jpg

thats all i did

rubbed down, etch primed and sprayed with gloss black enamel
still looks as good today as when it was done years ago

I would like to spray my headlight trim rings satin black. Would the 225 paper be sufficient to scuff the chrome down? Or should I Use a harsher grit?

225 should do it. You simply want to dull the shine to give the etching primer something to grab... ;)

sending mine off to be powder coated along with bumpers, and all interior trim

I used a wire brush drill attachment. Didn't take long to scuff the chrome down:)

i used one in my angle grinder but only on the bumpers
i think the rest of the trim is too delicate
my body trim is only aluminium and cos i have semi sealed headlights the chrome rings are plastic