GermanLook Forums

GermanLook Forums (https://www.germanlook.net/forums/index.php)
-   Suspension (https://www.germanlook.net/forums/forumdisplay.php?f=12)
-   -   Output flanges (https://www.germanlook.net/forums/showthread.php?t=8695)

al_kaholik June 4th 2007 13:52

Output flanges
 
Not sure this is in the right section, but is it just type 181 output flanges that will fit into an IRS gearbox to allow the use of 944 CVs and axles. CB performance offer a flance, part number 4482 on their website, that states "fits t1 transmissions to allow the use of t2 CVs. Could these be used? Details can be found here

http://www.cbperformance.com/catalog.asp?ProductID=1353

Thanks in advance.
Al

trevorbrady June 4th 2007 14:39

i think you've answered your own question. type2 CVs are the same as 944 CVs

al_kaholik June 4th 2007 15:45

Well this was my theory, but before forking out for them I wanted to be sure.


All times are GMT -4. The time now is 10:44.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved