Not really German look question - but 1303 wheel knowledge required
Hey all.
This isn't necessarily a G.L. question, but I'm hoping that some of you guys may have the information that I need. I'd like to fit a set of Gas burner reps (4 lug) to the wifes 1303 cab. Its got standard brakes and standard struts with lowered springs. I was thinking about fitting 165/65 s on the front and 185/65on the rear, maybe lowering a bit more all round to reduce the arch - tyre gap.Id like the tyres to sit marginally inside the edge of the fender (and clear it!). The wheels are 15/5.5/22et. My question is - would they fit under the front arches without fouling the struts? If not, could I get away with a 5mm or 10mm spacer? I've looked at the diagrams and tools to help, but I'm hoping that someone might have had some real experience with similar wheels / offsets. Thanks Monkey |
you should be fine
thats the same size and offset of my 8-spokes. but i'm running 145-65-15's up front http://i8.photobucket.com/albums/a46...e.jpg~original |
Great thanks.
Its got 8 spoke copies on it currently, although I'm not sure of their offset. Should be good. |
All times are GMT -4. The time now is 20:37. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved