bumpers
 

So for a german look 1303s with 3in wide rear wings, 911 turbo twist wheels and a 200hp motor.........

wat do i buy?? Europas with a polished middle (where the black tape is) and painted rest

or a mix of cal look with american spec towel rails chrome.....

help!!!!

whichever you decide on buy 2 fronts.
The shape of the rear is flatter with the 3" fenders.

so will standard rear look completly wrong and will the bumper mounts be in the right place??

to get the standard rear to work you would have to space it out a couple inches.
We went with the front on the rear and it worked out looking like stock with our 1.1/4" widened fenders. The holes are in the same spot.

you can section in more length to the rear bumper... this is what i did to the europa style bumpers i have.
I added 11 inches total, i used TWO bumpers to make one. I cut each bumper a few inches (5.5" from center) and welded the two together, dressed the welds and some body work...done. Make sure you get two alike bumpers .two new ones, no mixing new from old or different makes together. the profiles are always off a hair. you can use more or less bumper depending on how you want it to look. i just have the ends meet up 1/2" from the fenders edges.