Porsche 924 rev counter help
Hi guys, I have a Porsche 924 rev counter that I would like to wire into a Beetle/Type 3
The one that I have is from a '77 924 and has 3 terminals at the back. One that says +12 One that says 1 One that says - (minus) What goes where? Can anyone help? Thanks |
A guess?
+12 is to the +ve on the ignition switch circuit - is earth 1 Is the feed from the coil ??????? Does the unit have a separate circuit for the internal lamp? Clive |
Yes, it has two plug on connectors for the lights. I guess that you could pull current for those lights from the speedo lights.
Can anyone confirm that it is indeed the correct way of wiring up? |
That is how I would wire it.
12 to key on power + - to gnd 1 to neg side of coil or tach out of CDI box daisy chain the lights to the speedo lights so they will be on the dimmer with the speedo. |
Good stuff, thanks :)
|
All times are GMT -4. The time now is 13:24. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved