GermanLook Forums

GermanLook Forums (https://www.germanlook.net/forums/index.php)
-   German Look Tuning (https://www.germanlook.net/forums/forumdisplay.php?f=19)
-   -   What holds your spare wheel? (https://www.germanlook.net/forums/showthread.php?t=11610)

Bogara_ZO March 3rd 2013 12:20

What holds your spare wheel?
 
Hi,
What holds your spare wheel on place?
I have a porsche space saver and looking for ideas to hold it in place..
Thanks

Steve C March 4th 2013 19:27

Hi

I have mine on top of my fuel tank and its held in place by bracket on my strut brace.

Steve

NO_H2O March 5th 2013 08:09

Mine is a combo. Spare hold down, battery hold down and jack mount. I deleted the back seat, moved the battery and added the jack. The weight removed from the back seat area and added to the spare tire area helped the car to bite into corners and the jack looks kind-a cool. The plate is made from carbon fiber over honeycomb core board used for super light weight aircraft cabin flooring.
I install 4 10/32 rivnuts in the in the car and use triwing thumbscrews to hold the top cover down. The battery is mounted to another plate that locks into the spare wheel.
http://i209.photobucket.com/albums/b...0.jpg~original
http://i209.photobucket.com/albums/b...1.jpg~original

Luismj March 5th 2013 17:54

I am interested in this subject too...

Samples:

http://i712.photobucket.com/albums/w...d.jpg~original

http://i712.photobucket.com/albums/w...4.jpg~original

http://i712.photobucket.com/albums/w...1.jpg~original

Humble March 6th 2013 00:37

Dave, your car is beautiful! How well does that single wingnut hold down the jack? Seem like you'd still get some fore/aft movement out of the heavy end where the jack handle goes.

NO_H2O March 6th 2013 08:02

Thanks Humble.
The swivel wheels of that end sit in a notched aluminum cleat so they can not move. The roller wheel sits in a full length "V" notched aluminum block. The wingnut, lock washer and stud are 5/15 and with a wedge of aluminum to take up the angle and make a square surface for the nut to clamp down on. It has not moved yet. The 2 pc. handle is clamped in a block we bored and then split, it fits the handle very tight and is held down with a 1/4" stud/wingnut/lock washer. I don't think it is going to go anywhere.

itHaKa March 10th 2013 23:44

in my case , i don't need to hold it ,fits good in the stock place , however my car is not a racer ...

https://lh3.googleusercontent.com/-n...0/IMG_0221.jpg.

Bogara_ZO March 11th 2013 07:53

Thanks for the input guys! I'm interested in supers and please post pictures if you have.

Dave, that looks cool and unique!!

Gerrelt March 11th 2013 14:26

Because I've got a radiator up front, I've put my space saver spare tire upright. I tied it to the strut brace with a luggage strap:

http://www.gerrelt.nl/alfa/front_rad...erve_wiel1.jpg http://www.gerrelt.nl/alfa/front_rad...serve_wiel.jpg

I've tie-wrapped some rubber pieces to the strut brace where the wheel touches the brace. I can still move it a little bit if I apply some force. It's probably not tight enough for racing.
It's quite amazing how much space there is in the middle, I can put the wheel pretty much upright and the bonnet will still close without touching the wheel.
Here I've turned it around and put it even more upright to gain some more luggage space:

http://www.gerrelt.nl/images/phocaga...l_dscf5996.jpg

Steve C March 11th 2013 19:13

Hi

These are some photos from my old 1302 and my new 1303.

http://i1184.photobucket.com/albums/...5.jpg~original

http://i1184.photobucket.com/albums/...3.jpg~original

http://i1184.photobucket.com/albums/...f.jpg~original

Steve

Bogara_ZO March 15th 2013 05:38

Quote:

Originally Posted by Steve C (Post 85746)
Hi
These are some photos from my old 1302 and my new 1303.
Steve

Thanks for the pictures Steve!
This method is similar to the ones I'm looking for!
For example:
http://i110.photobucket.com/albums/n...3.jpg~original
http://i110.photobucket.com/albums/n...9.jpg~original
http://i110.photobucket.com/albums/n...3.jpg~original

oasis March 15th 2013 22:03

Quote:

Originally Posted by Bogara_ZO (Post 85742)
Dave, that looks cool and unique!!

Dave does great work. When he implements a unique idea -- his or someone else's -- it looks like it was always meant to be. :cool:

Joel March 20th 2013 02:50

For mine I trust the good old rubber occy strap :lmao:

http://i79.photobucket.com/albums/j1...2.jpg~original

owdlvr March 20th 2013 15:40

I'm using my strut brace with the tire on an angle.

http://farm9.staticflickr.com/8449/7...b34ed5f2_c.jpg

-Dave

kai4130 April 10th 2013 13:28

I have a little nubbin welded onto my tank. The rest is from a 944.


http://i16.photobucket.com/albums/b3...f.jpg~original


All times are GMT -4. The time now is 09:03.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved