'69 / '76 Germanlook Project
i started this project october 2008 - starting with a 1976 body and 1969 chassis. I started off with a 1976 beetle i had since i was 15 - and acquired a 1969 chassis to IRS.
a couple of pics before http://i591.photobucket.com/albums/s...2.jpg~original http://i591.photobucket.com/albums/s...0.jpg~original First up was new heavy duty floorpans and IRS conversion with 944 Turbo a arms http://i591.photobucket.com/albums/s...0.jpg~original http://i591.photobucket.com/albums/s...8.jpg~original http://i591.photobucket.com/albums/s...6.jpg~original http://i591.photobucket.com/albums/s...2.jpg~original with this being shoe horned in next! http://i591.photobucket.com/albums/s...1.jpg~original The chassis has also received a couple of small repairs to the framehead, a hydraulic clutch set up a a bug@5 speed shifter http://i591.photobucket.com/albums/s...8.jpg~original http://i591.photobucket.com/albums/s...5.jpg~original http://i591.photobucket.com/albums/s...4.jpg~original http://i591.photobucket.com/albums/s...9.jpg~original the clutch MC was fitted through the inspection hole (had to be slightly enlarged) and a hole made behind the throttle lever arm cover for access http://i591.photobucket.com/albums/s...1.jpg~original http://i591.photobucket.com/albums/s...7.jpg~original i think this is a much better way of installing it rather than cutting a large hole in the top of the tunnel as suggested :) |
Those are some nice MIG welds on the IRS pivot brackets. Well, from the progress so far looks like this bug will be on the road soon then. I'm going to start some rust repairs on my bugs body pretty soon, doing alot of what you have done already. This is good inspiration for me, and others I'm sure! Keep it up!:D
|
nice
|
Thans for the kind comments :)
. ive just received my aluminium gearbox mount adapters from a friend so the rear cradle is now bolted to the gearboxx - when we get some room in the workshop il get the chassis back down and finish fitting the gearbox. at the moment im just prepping the bolt on panels for paint. not very interesting so i wont bother posting pics of that. cheers Deano |
Wrernchnride from the looks of your build so far - the body will not be a problem for you - do you do it as a job also? im awaiting pics of your clutch slave cylinder install as ive still gota do mine ;) Think im going to mount mine similar to Wally.
|
Quote:
|
Good looking project so far. Keep the pix coming.
|
ive got loads of pics of the body resto - but didnt want to bore you guys with all of those.
yesterday my gearbox blocks to mount on the beetle cradle turned up and they work nicely :) i just need to get some countersink bolts but this is it mocked up. im going to bolt it in and then mock up the front mount which i have all the bits for it just need welding together! i also ordered some 4cm wider rear wings from CSP which dented the bank balance somewhat! Hopefully my Kafer 5 bar set up from vdub engineering will be ready soon too! its all starting to come together :D anyways more pics! Ally spacer blocks for the beetle mounts http://i591.photobucket.com/albums/s...8.jpg~original blasted 944 turbo a arms - not sure whether to leave them bare - paint them, powdercoat them or anodise them. ive left an ally springplate cover outside to see if it oxidises http://i591.photobucket.com/albums/s...0.jpg~original powdercoated goodies :) still awaiting new bearings/bushes etc from pelican parts before i can put it all back together http://i591.photobucket.com/albums/s...1.jpg~original 996 caliper and rotor. 944 front hubs and cb performance dropped spindles away for machining. http://i591.photobucket.com/albums/s...2.jpg~original finally a nice upright oil filler for my type iv motor build! http://i591.photobucket.com/albums/s...3.jpg~original :D offically started prep on my doors yesterday after removing the worn hinge pins. its going to be a slow process but it hsould be worth it! |
Looking great...it will all be worth it in the end (thats what I keep telling myself anyway :rolleyes::lmao: )
|
Dean
Who are doing the work on the hubs and spindles? Cheers Steve |
a friend of mine who works in letchworth :)
|
Quote:
|
i'l have a word. i havnt managed to get a fixed price from him yet. what hubs are you using? i dont know off the top of my head but are all bearings the same for 944s?
|
Using early Turbo hubs (1 year only) and turbo 4 pots. As far as I remember the 944 bearing sizes are the same but spacing between may differ.
|
All times are GMT -4. The time now is 01:57. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved