Turbo fuchs 8x16 944 or 911?
 

Hello,
I was wondering if anyone knows what type of fuchs for rear should fit under stock fenders on a 1303.I m talking for 8x16 but i dont know if its a huge look different (bad or cool), since were produced 10.6 offset for 911 and 23.3 offset for 951.(112 ,135 backspace accordingly).
The 911 have a better deep look though,
Any help appreciated :)
Thanks!

No, they won't fit...With an IRS car it takes a bit of clearacing to fit a 7" wheel...8" might be possible with the right offset, but things would be very close in the end if possible to begin with.

ET23.3 and ET10.6 would require 1-1/4" wider fenders...ET10.6 would fill them out excellently with a stock trackwidth too.


Things that do fit a 'stock' car:

15x4.5 ET42 (rare)
14x5.5 ET46 (common)
15x5.5 ET42 (rare)
15x7 ET49 (ultra-rare)
15x6 ET36 (common)
16x6 ET36 (common)