Drysump pump made in Germany
2 Attachment(s)
Hi @ all,
here I offer an drysump pump for Typ4 or Typ1/WBX The pump is complete out of aluminium and cnc produced . The gears are 38mm at the suction-side and 26mm at the pressure-side. The connection thread are M22x1.5 Many people in europe use this pump on racetrack, without oilpressure problems. Price: 350,-EUR + shipping costs Shipping worldwide! Payment with PayPal (+4 percent fees) or money transfer (only europe) Thanks and greetings, Thorsten Pieper |
Thanks for posting this Thorsten. I have placed my order.
Sandeep |
I've received my pump from Thorsten and the quality is outstanding :D
The CB performance 4 gear pump is tiny compared to the new pump :rockon: http://i10.photobucket.com/albums/a1...0.jpg~original http://i10.photobucket.com/albums/a1...1.jpg~original Shipping from Germany took 1 week. Sandeep |
Hi Sandeep,
thanks :):):) Greetings Thorsten |
Hey Thorsten!
Where are the other propaganda pictures(lifters etc.)? Greets,Arnoud |
Does the TP pump fit under the BAS Ahnendorp or CSP python exhausts w/o any modifications? Looking at Wally's engine pics, I guess it does fit under the Ahnendorp...
|
Quote:
they comes later:D Lifter are sold out........ Greetings Thorsten |
Quote:
Hi Xellex, normaly it have to fit, I donīt heard any problems...... The pump come approximately 60mm out off the motorcase. Greetings Thorsten |
Very nice pump!
|
I like the design of the german pump, looks pretty stout. I'm guessing you have to use a 5" power pulley with this pump? It doesn't look like a larger pulley would clear the pump even with a spacer.
|
Quote:
ps.I have a set already but forgot the details on how to machine the lifterbores to fit the adapterbushings:o.Will you be in Hannover at Mel's? Greets,Arnoud |
Quote:
again:D:D:D but next week, comes the new series:p:p:p :):):) I will be in Hannover at Melīs...... You only have to mill the lifter bores down....7mm are enough!! Then heat up the motorcase to 80°C and press the bushings into the case. Ready!!!! Greetings Thorsten |
Dammit I didn't want to spend that much on a pump! But it looks soooo goooood.
|
Quote:
I used to have a "stock" type 4 Ahnendorp 145mm (5,7"?) pulley with the normal porsche cooling systems, which fits no problems. Actually..I have now the 157mm (6,2") pulley with the Riechert set-up with a toothed ring on the back side and that one didn't clear, but I have cut out Thorstens nice pump for the pulley and toothed wheel..:shocked: and now it fits the turbo engine as well :rolleyes: I don't dare show pictures of it though... |
Quote:
|
All times are GMT -4. The time now is 08:20. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Đ www.GermanLook.net 2002-2017. All Rights Reserved