GermanLook Forums

GermanLook Forums (https://www.germanlook.net/forums/index.php)
-   Suspension (https://www.germanlook.net/forums/forumdisplay.php?f=12)
-   -   Can I use 924 disk on (https://www.germanlook.net/forums/showthread.php?t=3432)

vespaboy December 5th 2003 17:39

Can I use 924 disk on
 
I have 72 standard and I plan to use 924 brakes disk in front and 924 drum in the rear...

Because it changes the bolt pattern...

Is this a good Idea and is it possible...


Thank you ......


HELP PLEASE>>>

63Rag December 5th 2003 17:51

924 Porsche same as VW 4 pattern
 
924 is same bolt pattern as 72 beetle

It should be a straight swap 924 is thea same bolt pattern as Volkswagen, it was designed by Porsche for VW initially. The 944 came with the porsche 5 lug pattern. I have two sets of 944 brakes NOT a straight swap. One is for sale, Check out Sale section. Good luck
Wolfy

vespaboy December 5th 2003 23:28

no the pattern is 4x108 for the 924...

the 914 is the same as the beetle...

i just need to know if the disk will fit from a 924 to the beetle...


thank you......
i may be wrong so any info is welcomed......

Superman December 10th 2003 02:18

There are no real benefits in the 924's 4 bolt brakes, they are so close in specs to the Beetle and the oddball 108mm bolt pattern will make wheel fitment difficult.

vespaboy December 10th 2003 14:27

thanx for the info...

I just thought because it was easy to get these disc and that ford focus had the same pattern that it would be easy to find after market rims...

Were can I buy blank disc or some with other patterns?

Superman December 10th 2003 19:44

Drilled drums or discs, Topline Parts.


All times are GMT -4. The time now is 14:58.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved