Sving / Irs rear Shock lenght
Hello .
If we use a , 1972 model t1 as example . Is the lenght of the rear shocks the same on both sving axle and IRS . ? As i have converted my sving axle car into irs , and trying to use my " old " konis, They seem about 1.5 cm to short . This is when the springplate is in " resting " position . Car on stands . One possible reason is that the irs spring plates are thinner " vertical way so to speak " . So they will take the car further down before they hit the metall in the frame , where the spring plate rests when jacked up / on stands . Any inputs boys ? regards Puma . |
hmmm...really don't know but if you wanted why not just slowing put some wait to the spring plates 'til the shocks fit, frankly I don't think the shock will ever fully extend.
I looked at aircooled.net and they bunched in the shocks for bugs at 66-73. and because of this overlap of years and differences in swing and irs, well I wouldn't be too worried. (this was for gas shocks the stocks ones were still split depending on suspension type). |
All times are GMT -4. The time now is 11:24. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved