GermanLook Forums

GermanLook Forums (https://www.germanlook.net/forums/index.php)
-   Suspension (https://www.germanlook.net/forums/forumdisplay.php?f=12)
-   -   Sving / Irs rear Shock lenght (https://www.germanlook.net/forums/showthread.php?t=6116)

puma-Alex June 19th 2005 04:47

Sving / Irs rear Shock lenght
 
Hello .

If we use a , 1972 model t1 as example .

Is the lenght of the rear shocks the same on both sving axle and IRS . ?

As i have converted my sving axle car into irs , and trying to use my " old " konis, They seem about 1.5 cm to short . This is when the springplate is in " resting " position . Car on stands .

One possible reason is that the irs spring plates are thinner " vertical way so to speak " . So they will take the car further down before they hit the metall in the frame , where the spring plate rests when jacked up / on stands .

Any inputs boys ?

regards

Puma .

rip June 21st 2005 12:48

hmmm...really don't know but if you wanted why not just slowing put some wait to the spring plates 'til the shocks fit, frankly I don't think the shock will ever fully extend.


I looked at aircooled.net and they bunched in the shocks for bugs at 66-73. and because of this overlap of years and differences in swing and irs, well I wouldn't be too worried. (this was for gas shocks the stocks ones were still split depending on suspension type).


All times are GMT -4. The time now is 04:49.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved