Here's the start of the front mount. More laters.


http://photos-d.ak.fbcdn.net/hphotos...65395167_n.jpg

Front mount is done-zo. Hoping for some time this weekend to screw with the rear mount.


http://photos-d.ak.fbcdn.net/hphotos...14681130_n.jpg

So, after much thought, I've decided to ditch the cradle mount as I felt it would leave the bellhousing too thin after countersinking the bolts. So I started building a rear mount using the stock type IV moustache bar......

http://photos-e.ak.fbcdn.net/hphotos...81011518_n.jpg


And here are the bits that will be welded to the frame/moustache bar once I box in the frame.


http://photos-d.ak.fbcdn.net/hphotos...81537401_n.jpg

Haven't updated this in a while.....

Rear mount is just about finished. Haven't taken a pic yet. Because I'm lazy.

Dash fill panel tacked.

http://photos-g.ak.fbcdn.net/hphotos...17641759_n.jpg


And something I was goofing around with. I cut the decklid because it will be getting a Porsche 356 decklid grille. So instead of mounting the plate to the bumper or something lame, I thought this would be nifty. Let me know what you think.

http://photos-f.ak.fbcdn.net/hphotos...62092710_n.jpg

Here's the pic of the mounts. Need some paint etc, but I'm happy with them.

http://photos-g.ak.fbcdn.net/hphotos...37392623_n.jpg

Love the lift hatch idea. Do you have pix of the engine lid with the 356 grill in it? Do you think the solid engine/tans mount might be a little brutal without some isolation?

I don't have a 356 grille...... yet. Will post pics as soon as I get one. As far as the solid mounting, I've always done that with all of my vws. I actually prefer it. Thanks for the compliment on the hatch. I'm still not 100% on how it'll look installed.

Got the shift linkage almost sorted. Just need to figure out a bushing for the bit that attaches to the hockey stick. I've got an idea... hopefully it'll work the way I envision.

http://photos-f.ak.fbcdn.net/hphotos...23054266_n.jpg

I also made a patch/notch to fill where I took the heater tube out.

Oh, and I finally got the 356 grille so that mod will start soon...stay tuned.

No pics, but a somewhat exciting update. Traded my t-3 turbo for a brand new T-4 with BOV and picked up a set of suzuki gsxr 750 throttlebodies for my fuel injection conversion... I promise I'll get some pics up soon.

Get them up as soon as possible!!!

Looking forward to some pix. Really been thinking about trying some GSXR throttle bodies myself.