My project : Mexico Racer
 

Hello all !
First, sorry for my english language, i'm a froggy :eek: :lmao: !!!
So, my car is a 1984 mexico beetle. I bought it last year in july and the first thing to do were the rear brakes. I rebuilt the whole circuit brakes with new parts from Germany only ! Then I bought 4 16" rims Porsche Boxster with 175/50/16 front and 195/55/16 rear. I bought new dropped spindles, new front disc brake kit in 5X130 and finally bought new rear 5X130 drums :rolleyes:... To date, only the rear wheels are installed on the car... This weekend, I'll install the front brake kit and the front wheels ! Enough talk, here are the pictures :

First, when I bought the car :

http://nsa14.casimages.com/img/2010/...0009303785.jpg

Then with the rear wheels installed :

http://nsa14.casimages.com/img/2010/...5925906664.jpg

Another pic from the rear wheels :

http://nsa14.casimages.com/img/2010/...0131582527.jpg

After installation of the front brakes kit, I will lower the rear axle, install the rear fenders and taillights from 13/15/1302 (I hate the actual big taillights) and probably paint all the chrom parts in black except the bumpers to be replaced by the same in carbon if $'ok or paint fiber if $'not ok :lmao:...
To be continued ;)

Welcome to our site. Looks like you are off to a good start.
Your english reads fine to me.

lookin good

Very clean, great work!

Jason

Welcome! Keep at it - Looks good! :)

It took you 3 years to post? :). Welcome. Keep us updated on the progress. Looks like a great start.

It took you 3 years to post? :). Welcome. Keep us updated on the progress. Looks like a great start.

Yes, 3 years :eek:... When I joined (correct ?), I had no VW, but now, I have it so I show it and I post :lmao: !!!
Thanks to all for comment ;)

Yannick have you been spying on me??

http://www.germanlook.net/forums/pic...pictureid=1646

Whaoooo !!! It's exactly that I want... Did you spy my mind from a long time :lmao: ??? Fortunately we're not neighbors, we could not differentiate them :lmao: !!! Seriously, yours is very beautiful, congratulations ! What is the size of your tires ?

The camera makes it look a lot better then it is :D. I'm running 16X6 ET50 / 205-55-16 the front and 16X7 ET40 /225-50-16 on the rear. Rubber is Michelin Pilot SX.

Yours look nice! Hurry up and get the front done I want to see the whole thing. The Mexi-Beetle still has a swing axle and uses a beam for the front right?

Yes, Mexico Bug are like all the 1200, 1300, 1500... Swing axle and beam for the front... I started the work on the front, but ball joints are damaged so I will change them but for that I'm dismantling the suspension arm, then again late in the project :angry: !!! Don't worry, soon I continue the project ;)...

Let's go Frogs ! :)

Hi folks !!!
The car is on his wheels... I finally change all the suspension ball joints... One brake hard pipe had to be changed too but and today, I I bleeded the brake system with my Eezibleed (very fast, good product) and put the front wheels on !!! However, a problem : The rotor hubs exceed and the front wheel caps don't fit :angry:... Does anyone have a solution for that ?
Pics :

http://img7.hostingpics.net/pics/698488P1020609.jpg

http://img7.hostingpics.net/pics/448384P1020614.jpg

http://img7.hostingpics.net/pics/236324P1020619.jpg

To be continued ;)

I have the same problem with my wheels. A pair of 1/4" spacers solved the problem, and I can pop my center caps on. Looks to me like you've got a little bit more of an issue then that. 3/8" spacers might solve your problem, but then you could end up with fender clearance issues.

-Dave