Locked Out
unable to open the bonnet, seems like the pull-cord catch has dropped. :angry:
does anyone know how to gain access without damaging the bonnet. :confused: cheers |
http://www.midsouthvw.com/TechTips/t...eningTrunk.htm
Scroll down to the bottom. Last option is your solution. -Dave |
Quote:
will give that a go. :eek: |
Not as scary as it seems.
I would recommend using a large bung for the rear of the spare wheel well and rigging up a piece of wire for in case of future failure |
Hi
If you move the lever towards the side it will go past its normal stop rest. This is what you need to do with lever to get just a bit more travel that can sometimes pull the cable enough open the bonnet. You pull the lever over so that it can go past its normal stop.http://forums.aussieveedubbers.com/v...1199&aid=86372 Other than that you can cut the bonnet handle to release the lock. I always fit a secondary cable release under the mudguard. Steve PS I had trouble loading this photo, let me know if you cant see it |
thanx 4 the info
ps unable to see the photo |
Quote:
I cant understand what's happening, I cant load this photo, its only 72 kb. I will try to send it in a PM Steve |
All times are GMT -4. The time now is 20:43. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved