Project Update...
 

How are everybodys projects coming along.???????????

I finally got my chassis stripped and the bottom half painted with POR-15. After the first coat I wasn't happy so I wet sanded my chassis and applied a second coat, looks even better. I'll give it a few days to dry and then I will flip it over and apply two coats to the top half. After that dries I will finally get to bolt my suspension back on and then the body. :D My body has been off my car for three and a half years and I can't wait untill it goes back on. :D

I will have a garage floor again. :D

After 3+ years that will be a joyous reunion. :D

I think I'll have a party. LOL....

I'm at the point that.. almost al of the rust is out of my car :rolleyes: FINALLY :D

-I have testfitted my Remmele airintakes in my sparebody.
-I have searced almost hole the internet on pics of rollcages.. and than especially Heigo's in bugs.. but haven't found much (only the pics of the Heigo's on Heigo's site itself).

Pics of my progress
My project

WHo has pics of Heigo rollcages? WHich one of you got an Heigocage (I thought Alex had one but i dn't know for sure) and can make some close up pics of the mountingpoints of the rollcage to the body and some close-up-pics of the mountingpoint which mounts the several rolcage segments together?

If some one has some pics.. plz PM me.. or post them here..

Thanks in forward
Wiebrand (B-tuning Holland) :D

Take a look here for some pics of my aluminum Heigo roll bar setup.To the pics

Alex

Thats good to hear Brendan, congrats!:D

My project isn't that far yet, but I do have to put the body back on the pan to measure the intake duct from the roof to the fire wall and see how much clearance I'll have with a roll cage and the seats. I'm also converting my car to right-hand drive. I'll have more progress in the near future...stay tuned


John