Porsche 944 or 928 spindles
I read in one of the forums they were interchangeable with the superbeetles, but can they work on a standard 72 bug?If they can, will they work with the stock drums with the 4-130 bolt pattern?I know they make 2.5" drop spindles but im told they wont clear my front 13x5.5" wheels.And I was told that just running and adjustable beam an lowering it the full 4" is unsafe.
If needed, I'm planning on either running a 175/60/13 or a 175/70/13 up front. the 175/60/13 is 21.3" tall in height the 175/70/13 is 22.7" tall in height. The reason for lowering 4" unless i dont need to lower it that much to get a 1" gap between the fender lip and tire. Thanks for any info. |
nobody knows?
|
Hi
They only work on super beetles because they use struts, your car doesn't have struts. Its your decision, but why would want to run 13 inch wheels? Steve |
I wanted wider versions of my current wheels and found a set just like mine but different sizes.13x5.5 and 14x7".
|
944NA brakes do clear 14" wheel, but I don't think they will fit under 13's....
Lanner |
thats cool but my wheels are 4-130 bolt pattern.
|
All times are GMT -4. The time now is 10:48. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved