Porsche O.E. Wheel Discussion
Please use this thread to discuss the fitment of Porsche factory wheels.
http://www.wheelenhancement.com/index.php?t=Wheels |
I'll bite...
My 1302 - Boxster S brakes all around, with 944 steel arm rear setup (+22mm per side). Modified 944 hubs in the front for beetle bearings (+15mm per side). 17x7et55 cup II's in the front (205/50), 17x8et70 Cup II's in the back (225/45). Topline struts (old style) with honda coil conversion. Stock fenders, fits lovely. http://images.thesamba.com/vw/gallery/pix/470894.jpg Lanner |
Thanks Lanner, using this thread as a FAQ and if everyone (tried and true) can post their results it would be a valuable resource.
|
No worries Superman. This is a great sticky. Here's a setup I did last winter (Nelson's Vert):
1302 Vert. Bugpack adjustable struts, Honda coils. 944Turbo front brakes, with modified 944 hubs in the front for beetle bearings (+12mm per side). 944 steel arm rear setup (+22mm per side). 16x6et52 964 starfish wheels in the front (205/50), 16x8et52 964 starfish wheels in the back (225/50, IIRC). Stock fenders, Everything fits well, but the 8's in the back don't work (rubs fender) in that offset. Will be changing to 7et52's and everything will be butter. Lanner http://images.thesamba.com/vw/gallery/pix/470893.jpg |
One more (Carbo's Rag)
55 Rag. 3" narrowed beam (BJ). 944NA front brakes, with modified 944 hubs in the front for beetle bearings (+15mm per side), on welded dropped spindles. 944 steel arm rear setup with 944NA brakes (+22mm per side) modified for long swingaxle tubes. 17x7et55 Cup II's wheels in the front (205/40), 17x7et55 Cup II"s wheels in the back (205/50). Stock fenders. Everything fits well, but we had issues with inner front fender clearance. Added 20mm fronts spacers with long studs (OEM, from 944 rear) and everything is great. In retrospec, should have started with a less narrowed beam. 1.5" narrowed beam would be perfect. Lanner http://images.thesamba.com/vw/gallery/pix/470892.jpg |
My Bus. This thing has gone through many wheel/brake setups.
All have these common elements, 4.75" narrowed beam , 3.5" spindles, IRS conversion with wagenswest kit using 944 steel arms. First off: 944NA brakes, 15x6et36 cookies, 175/55F 185/65R. http://images.thesamba.com/vw/gallery/pix/497254.jpg Last summer: 17x7et55 (205/40) and 17x8.5et55(235/45) techno-twists. On 944NA brakes, used 12mm rear spacer. http://images.thesamba.com/vw/gallery/pix/390763.jpg http://images.thesamba.com/vw/gallery/pix/497255.jpg This summer: 16x6et50, 16x7et40 boxster split stars, with 205/40F and 225/50R on 964 C2 brakes. http://images.thesamba.com/vw/gallery/pix/497256.jpg I also had 17x7et55 and 17x9et55 Cup II's on the bus with the 944NA brakes, but can't find any pics. The rear was a SQUEEZE, but it fit. |
Hi
Not Porsche wheels, but the offset and size are Porsche like. 17x7 ET 55 (factory Subaru BBS), on a 2 bolt 1303. Front fit nice with narrow coils, rear needed to go steel 944 arms & brakes, fit really well. Steve http://i1184.photobucket.com/albums/...0.jpg~original http://i1184.photobucket.com/albums/...n.jpg~original |
Steve, Looks killer. You remachined the rear 944 brakes for 5-100? What brakes in the front?
Lanner |
Hi Lanner
Thanks, it is 5x100 now. This is my sometimes daily driver and sons 1st car until I finish my other 1303. I was able to score for the rear a pair of twin piston alloy Brembos from a later 911, these have 42mm pistons. On the front I'm using stock bug rotors with early Type 3 calipers, these also have 42 mm pistons. Its very slightly biased to the rear, I'm fitting a bias valve soon. Steve |
Quote:
|
Hi James
He just got his licence on November 1st, I have a 1776 ready to go in when he has a bit more experience, then some dual 40mm Webbers. Steve |
Quote:
Work great on the rear of my VW412, speaking of which (see the bridge I'am making :D ): http://www.keversite.nl/fotoalbum/fotos/43091.jpg http://www.keversite.nl/fotoalbum/fotos/63256.jpg Porsche ClassicSport I (BBS made) 7x17 ET55 and 8,5x17 ET52 with 195/45(in the pic still 205/50) and 225/45 rear. Front calipers are BMW 320, 48mm cups. Adapter plate for the off-set and stud-adaptment |
The bug has the same wheels, but in 18" form 7,5J and 9J wide with 245/35 and 225/35 (now 225/40) semi-slick like tires.
993 rear calipers on the rear, GT2 rear ones on the front. Alu wide rear alu arms, front has 18mm 944 spacers with the original long studs, which gives an amazing original steering circle (which is relatively small for a 1303). Original size (wide) springs up front. Widenend fenders from Kerscher. http://www.keversite.nl/fotoalbum/fotos/66022.jpg |
Hi Wally
I must have got something wrong in the measuring. They are an amazing calliper, very light. Would they fit on the front of a 944 setup? On my car they work very well with the stock 19mm M/C. So your running 48 mm front callipers are you running the stock M/C? Steve |
Quote:
Quote:
|
Quote:
|
Quote:
evilC |
That was my second thought Steve ;)
Its just that I have noticed that when fully loaded with family and luggage (i.e. dog) and traveling at speed, braking to a full stop does suffer, which is mainly due to the front brakes (they look just like the orginal cast iron ones, but are only one size bigger) with the non-vented disk. Therefore I still hope to come up with a solution to mount a nice alu Brembo to the front. Problem there is the spindle, its different from a type 1 so a 944 adapter bearing is maybe not possible...but let me worry 'bout that for a while ;) |
Wally,
Why not fit the 944 struts c/w discs, the early ones are a straight replacement and even have the speedo cable hole? evilC |
Not a straight replacement on a 412
|
Quote:
Lanner |
Quote:
Lanner, if you could make me something, I would definately be up for it, spindle/hub wise or caster adjustment ;) You know the top strut bearings are the same in my 412 as in my late 1303 beetle and I need the extra caster on both. So an adjustable caster top bearing plate is still on top of my list. Caster I have now is between 1 and 2 degrees and needs to to 6-8 or so for optimum straight line high speed stability. I already have the Topline caster+ sway-bar bushings, but its not enough. Mayby because of my M030 front spindles but I dunno. Untill I have some top strut caster-adjustment parts, I don't dare go any faster than 120 mph or so.... The lowered 412 has the same problem. So two sets of these could make this all a happy world :rolleyes: Well, you can't blame a guy for trying right? (I know you have other engagements ;) ) Thanks, Walter |
Quote:
No worries, I'm on the project. But I'm in the process of moving and then off for almost a month. So it'll be into the new year before I have anything concrete to show. Also, not sure if I can get that much adjustment out of them. Will have to get out the slide rule and figure it out :-P. Are your cars sleeping for the winter? In the interim, I could probably come up with a static upper mount with spherical bearing. No adjustment, but fixed at a certain positive caster. Quick, dirty (and probably cheap). You can guinea pig them for me :) Lanner |
Quote:
Quote:
Quote:
Quote:
Cool! if you could make that happen, pls do so. The details we can discuss by PM or mail ;) Tnx in advance Lanner! Walter |
saludos desde Paraguay!!
increible!!!! todoss!!! hermosos!!! :eek:
|
Mine has 944 rotors all around with single piston calipers,topline versa struts + sport springs & Gaz inserts fully adjustable in 36 positions,beetle stock master cylinder.CUP 3 wheels 17x7.5 ET52 all around in widened fenders 4cm front and 6cm rear with 5.5 wheel spacer.
http://img19.imageshack.us/img19/9563/imageoyj.jpg |
2 Attachment(s)
Heres my 1964 short SA bug
Test fit of 16 x7 fuchs , fat 205/55/16 rubber, and Porsche 944 hubs. FITS!!! :Djust , Big of rubbing .;) A non euro tire would probably help too. Not as wide. |
987 Boxsters 2.7L wheels 17x8 & 6.5
235/45 & 195/45 Stock late IRS rear, 1-1/4" CCC fenders, 924S brakes w/factory ~19mm spacers Stock 'Ghia beam with adjusters on front, stock fenders, ~17mm spacers http://img.photobucket.com/albums/v2...3.jpg~original http://img.photobucket.com/albums/v2...1.jpg~original |
sorry, I can not good write English language, but I try...
I have these wheels under my car...Enkei, produced in 1983, end buy it over 2 years ago, new in the boxes, (found by a porsche dealer) front: 8J x 16 ET 11. at the back: 9Jx 16 ET 11. tires : front: BF Goodrich G-force 195/45/16. Back: BF Goodrich G-force 225/45/16. http://i109.photobucket.com/albums/n...1.jpg~original http://i109.photobucket.com/albums/n...1.jpg~original |
any pictures of fuchs wheels on a super ? would they go well ?
|
wow Orange B that cars gorgeous! Nice job!
|
Nice BBS! Might want to point the Porsche crest to the valve stem.:D
|
3 Attachment(s)
Pictured here are ROH 16 x 7" and 16 x 8" rims that were made in Australia. These are on my '73 Super with 924/944 lowering springs, probably too stiff for the street but I'll see what I want to do after autocrossing the car. They weigh:
16 x 7" 19lbs. 16 x 8" 22.5lbs. I was doing a test fit here, currently I have 928S rims on the car. Will be getting widened fenders at some point, etc. |
Anyone could help me to locate and buy a sett of Porsche steel wheels 5,5x15?
http://i1139.photobucket.com/albums/...s.jpg~original |
Damn, i had year ago two same/similar 5.5x15 porsche steel wheels, originally used with sparetires.
These wheels sometimes pops out for sale here in finland.. Here is good offset / size table for porsche wheels with pics: http://www.944racing.de/wheelweights.php |
Quote:
|
Here's a 56 bus I did last summer. 7 and 8" 16 dials. 4" beam with stock micartas turned down for scratch built beam, 4.85" non-flipped hybrid dropped spindles, boxster brakes, straight axle (short) with Wagenswest offset plates. Rear required 5/8 " spacers.
http://i797.photobucket.com/albums/y...0.jpg~original http://i797.photobucket.com/albums/y...7.jpg~original |
Here's a 59 bug I did last summer. I built a 4" narrowed LP beam (with shocks), Porsche 944NA disks all around etc, dropped drum spindles, short axle, 15x7 et52 wheels, stock 944 22mm rear spacers with studs.
http://i30.photobucket.com/albums/c3...photo-1324.jpg http://i30.photobucket.com/albums/c3.../photo-256.jpg |
Porsche wheels the easy way: 1" adapters. Stock suspension on 14x5.5s
http://i797.photobucket.com/albums/y...1.jpg~original |
Super old thread, but still info to know.
I picked up a set of original phone dials in the early offset (ET23.3). I'm running n/a 944 front discs and coil overs with 2.5 inch springs. Where would the phone dials foul the car? Total back spacing is 112.2mm. Seems like it would fit. |
All times are GMT -4. The time now is 22:26. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved