GermanLook Forums

GermanLook Forums (https://www.germanlook.net/forums/index.php)
-   Vdub Engineering (https://www.germanlook.net/forums/forumdisplay.php?f=40)
-   -   Finding hubs (https://www.germanlook.net/forums/showthread.php?t=9432)

V73W April 6th 2008 18:23

Finding hubs
 
I know on your website that it says to use 944S hubs on all the 944 turbo to SB/BJ kits, is there any N/A 944 hubs that will work with the turbo calipers and rotors on a SB? My problem is finding turbo or S hubs or at a decent price. Not a whole lot of 944T parts cars in south Mississippi and ebay's a joke when it comes to price.

flat April 6th 2008 21:39

The late-model (87-89) 944NA and 944T hubs are basically the same, just the retaining screw (the littel M6 that holds the disk in place while you position the wheel) is in a different spot. Once the wheel is on the disk is firmly sandwiched in place, so it doesn't make much difference.

Else this can be an option: (sorry, about the plug)

http://www.thesamba.com/vw/classifie....php?id=577630
http://www.thesamba.com/vw/classifie....php?id=578538

Worst case scenario I can track down hubs around here, about $C170ish a pair depending on the season.

Lanner


All times are GMT -4. The time now is 11:15.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved