Who is running 15x7 fronts?
I have a set of 15x7 et52.5mm phone dials with a 2" narrowed BJ beam with a 2-3" drop, 944N/A front disks on my 61'beetle with a 69' IRS pan.
Just wondering if anyone is running something similar, and tire size experiences. Thanks Mark |
So nobody has 15x7"s on the front?
|
I've never run that particular combo, but I know a 7"et42 on a 3" beam tucks stock fenders, and on a 2" beam it just fits. You will probably need spacers to get the deeper offset wheels away from the lower control arm so you have a decent turn capabilities.
Lanner |
yes im runnin that combomy tires rub they kinda stick out about an inch
|
Flat is right, I have a set of cookies. I stuck them on my Ghia just for kicks and they catch the lower ball joint. Almost sit on it. Stock beam, with lowered spindles. I had to buy a 16" or larger spare because the 15" inflate-a-spare did the same thing. :laugh:
|
I know I'm okay as far as clearance to suspension and the fenders. I just need to finish assembly on my steering so I can find out how little steering I have:eek: nothing like waiting for parts..... again
Looks like I'll have to invest in some spacers and longer studs. |
How about an update & maybe a pic?
I'm waiting on my 15x7 phonedials to show. They are going on a '74 Standard. |
I'm running 15x6.5 on a '70 Standard.
I'm using a spacer, but my turning radius still sucks. http://farm1.static.flickr.com/163/3...e34a883ddc.jpg Rob. |
What's your offset? Got a pic showing the fender too? Just to see how it fits.
|
Front Fender:
http://farm1.static.flickr.com/131/3...8e6860ce25.jpg I'm not really happy how they fit. I was planning on using the car for autoX, but it now has the turning radius of a Semi :bawling: Should have done more research up front. Eventually I might have to go with a narrowed beam, and even bigger spacers... I *think* the offset is either +35 or +38, I'd need to measure to be sure. Rob. |
Quote:
|
Quote:
|
I have 195/55-15 on 15x7 et52.5
25mm spacer(washers right now:D ), 2" narrowed beam http://www.imagestation.com/picture/...3/e9be28f2.jpg http://www.imagestation.com/picture/...6/e9be28ef.jpg still waiting for my body to get back from the body shop for final assembly:( |
Quote:
Rob. |
Quote:
|
All times are GMT -4. The time now is 17:23. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved