Rear apron
 

Hello, I am trying to make the rear apron so you can remove it, when you need to. it's on a 66 beetle, any suggestions?
http://i86.photobucket.com/albums/k9...d.jpg~original
http://i86.photobucket.com/albums/k9...g.jpg~original

Nothing seems to want to line up:angry:

Mines a 70 but placement of fasteners might help. I chose to hide mine. My apron didn't have that much of a gap though. To get to them I drilled holes thru fender lip. I will have to loosen the lower fender bolts to remove it, but how often should you have to pull the motor? That gap will have to be filled with a strip of metal unfortunately.

Thread here:

http://www.germanlook.net/forums/showthread.php?t=10190

Hi, thanks for the reply. Another question, my friend car is a 66. His rear body is a clip we replaced due do body damage. The person that sold the rear clip said it was from a 66. We were careful not to remove the wrong parts, or to much; so we feel why such a fitment nightmare. What year is your VW?

Again thanks for replying.

1970 all original before I got it ;)