No reverse lockout ?
 

I took out my quick shift kit because, well, it sucked.
However it appears that my reverse lockout no longer works ?
I can shift in reverse without pushing down the shifter.
I checked to make sure I had the shifplate right side up and all that, and I moved the plate around to see if that made any difference, but no dice ?

What does this mean ? Busted transmission ? Bent shiftrod ?

BTW, stock trans in a '70 Standard..

Rob.

Hi

You may have the shift plate in the wrong way round.

I will try to find a photos of the correct fitting.

Steve

The bent part on the inside of that plate, should be facing down, and to the right.

Hi

I found a picture I downloaded form somewhere on the net.

Steve

Thanks guys, I'll check again later today, but I'm pretty sure that's how I mounted it :(

Rob