914 2.0,1.8,1.7 Con Rod compatability?
 

I just picke up a 2.0 case at the boneyard without heads and pistons and connecting rods. Can I replace the rods from a 1.8 or 1.7 motor Are all models the same in this respect.
thanks
Wolfy

I believe the 1.7 & 1.8 are the same because they use the same crank, but the 2.0 has different rods & they are usually more expensive if you can find them.

the 2.0 had a different big-end size (=50mm as both 1.7/1.8 use a 55mm big-end) and with 131mm it is longer than the 1.7/1.8 con-rods (127mm)

The 1.8/1.8 crank, must stay with the matching rods.

The 2.0 was all by its self with both the crank and the rods

found them!
 

Just won a bid on ebay for the 2.0 rods. I also just got the heads from a 1.8 Ill have the valves opened up and port and polish and match the itake manifolds for a set of 40 webers. Next mission is to purchase a new set of 40mm Webrs
Thanks for input guys
Ralph