GermanLook Forums

GermanLook Forums (https://www.germanlook.net/forums/index.php)
-   Engines (https://www.germanlook.net/forums/forumdisplay.php?f=11)
-   -   Weber ict's...what size engine? (https://www.germanlook.net/forums/showthread.php?t=3587)

Xzenor December 31st 2003 19:07

Weber ict's...what size engine?
 
I have a pair of weber icts and am wondering what size engine these little puppies will perform best with. I'd like to build a 2110cc engine....will these carbs be good enough? Thanks.

boygenius December 31st 2003 19:10

I was told by my local VW shop that they wouldn't really work on anything bigger than a 1776 cc engine. But my memory could be wrong.:)

craazy Cooter December 31st 2003 19:25

NO!!! Use ICT 34mm carbs on small stuff like 1600-1641 t1 engines. I ditched my old dellorto 34mm FRDs and bought some 36mm drla's for $160 from the alfa dude on ebay. My whole carb kit cost me about $ 250 complete. Go for dual 2 barrels even if you have to use your kids tuition. Theyre worth it

boygenius December 31st 2003 19:30

Memory was wrong again.:o

NO_H2O December 31st 2003 19:48

1776 is as big as you can stretch a pair of ICT's I know of a couple of folks that run them on 1776's.

boygenius December 31st 2003 19:53

I knew I was correct.:)

craazy Cooter December 31st 2003 20:57

Yeah, but theyre not gonna give the greatest flow at 5000 rpm, you know? Theyre only good for daily drivers that arent maxed out on mods like most of our engines.


All times are GMT -4. The time now is 22:17.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved