loads of info/ need more now.944 brakes
 

ok guys since you all where nice enough to give me this site info i am hooked.now can you tell me if the bearing spacing is different between the 944 n/a(normally aspirated) i assume and the 944s or turbo front hubs, and is the rotor inset any different between the two? thanks kyle

My 1987 944-S front hubs are the same as the turbo model and I think the regular 944 are also the same. I often use places like www.pelicanparts.com as a cross reference source of information. For example if the 1987 + 944/944-S and 944 turbo all have the same spindle part # and the same bearing # than the hubs and the bearing spacing are all the same. :)